User's Manual

ManualsBrandsPHIHONG ManualsElectronicsLTE Module

4G Module User Manual

Product Name：4G network communication module

Manufacturer：PHIHONG TECHNOLOGY CO., LTD.

Model name：WLTPH-8M-RW

Spec：

Power

DC 10~25V

Energy consumption

200～500 mA

Interface

Micro USB Type B

Support band

LTE: B2/B4/B5/B12/B13/B14/B66/B71

WCDMA: B2/B4/B5

Operating temperature

-30℃ to +50℃

Product Photo：

Summary of content (9 pages)

PAGE 1
4G Module User Manual Product Name：4G network communication module Manufacturer：PHIHONG TECHNOLOGY CO., LTD.
PAGE 2
Accessories： 1. Micro USB cable * 1 2. Power cable * 1 3. Antenna * 1 Instructions： This product needs to be used with Phihong hardware 1.
PAGE 3
2. Install the power cable 3. Connect the antenna 4.
PAGE 4
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and(2)This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 5
Industry Canada statement: This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence.
PAGE 6
PAGE 7
This module is intended for OEM integrators only. Per FCC KDB 996369 D03 OEM Manual v01 guidance, the following conditions must be strictly followed when using this certified module: KDB 996369 D03 OEM Manual v01 rule sections: 2.2 List of applicable FCC rules This module has been tested for compliance to FCC Part 15, 22, 24, 27, 90, 2.3 Summarize the specific operational use conditions The module is tested for standalone mobile RF exposure use condition.
PAGE 8
PAGE 9
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization.