Specification

IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a
combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the
supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in
the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product
acceptance by Authorities Having Jurisdiction.
This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material,
manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of
non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing.
Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc.
Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.
This certificate is not evidence of current listing. To verify listing status, visit the IAPMO R&T
Product Listing Directory at pld.iapmo.org
Effective Date: March 2019 Void After: March 2024
Product: Lead Free Plumbing Products File No. 10258
Issued To: Kaiping Samliyu Sanitary Co., Ltd.
No. 51-53,
Jiaxing Industrial Estate
Shuikou Town
Kaiping, GUANGDONG
China
Identification: Each product shall bear permanent and legible markings to identify the
manufacturer. This marking shall be the trade name, trademark, or other mark
known to identify the manufacturer. The product shall bear the appropriate
IAPMO R&T certification mark. The product may also bear either "Lead Free" or
"Low Lead" above or in close proximity to the IAPMO R&T certification mark.
Characteristics: Products may include any pipe, pipe fitting, solder, flux, or other plumbing
products providing water for human consumption. Products listed below are to
be installed in accordance with the manufacturer's instruction. These
products have been verified with weighted average lead content <=0.25%;
Solder and flux lead content <=0.2%.
Products listed on this certificate have been tested by an IAPMO R&T
recognized laboratory. This recognition has been granted based upon the
laboratory's compliance to the applicable requirements of ISO/IEC 17025.