FreeSwitch 808I Quick Installation Guide
FreeSwitch 808I Quick Installation Guide Information in this document is subject to change without notice. Copyright © 2010 Shanghai Feixun Communication Co., Ltd. All Rights Reserved. This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied, reproduced, or translation into another language without the prior written consent of Feixun.
FreeSwitch 808I Quick Installation Guide products may be slightly different.
FreeSwitch 808I Quick Installation Guide Thank you for purchasing FreeSwitch 808I Switch! This Quick Installation Guide gives step-by-step instructions for setting up FreeSwitch 808I Switch. Installation Precautions Follow these precautions when installing your FreeSwitch 808I switches: i. Make sure you use the power connector supplied with the switch to connect it to an AC power source. ii. Install the switch in a fairly cool and dry place. iii.
FreeSwitch 808I Quick Installation Guide LED indicator lights The front panels of these switches provide status LEDs for system monitoring. : The Power LED lights up and will stay on while the Switch is powered on. LED 1~8: The Ethernet LED lights up when the Adapter is connected to a device through the Ethernet port. If the LED is flashing, the Switch is sending or receiving data over that port.
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.