English OWNER' S GUIDE WIRELESS EARPHONES with ACTIVE NOISE CANCELLING Thank you for purchasing PHIATON BT 220 NC - Please follow the directions, and read the guidelines carefully before use (Please, keep the owner’s guide for future reference). - Some functions of the BT 220 NC may not be available when it is paired with certain devices. Contents 1. SAFETY AND GENERAL INFORMATION 2. COMPONENTS & FEATURES 3. WEARING EARPHONES 4. CHARGING 5. POWER ON/OFF AND HEADPHONE CONNECTION WAIT MODE 6.
1. SAFETY AND GENERAL INFORMATION 1) Use a standard USB charging cable (included), with or without a charging adaptor (5V, over 500mA). * Adapter Not Included 2) Lower the volume prior to listening to audio to prevent potential damage to eardrums caused by sudden loud sound. 3) Listening to loud music for extended periods of time may cause hearing damage. 4) Do not store the device in places with a temperature higher than 113 ℉/ 45 ℃. 5) Keep the device dry.
2. COMPONENTS & FEATURES COMPONENTS - BT 220 NC Earphones - USB Charging Cable Monitor Button - Audio Cable - Carrying Case (+) Button LED Indicator - 4 sizes of Silicon Eartips Play Button (-) Button Call/Bluetooth - 1 pair Comply Foam Tips - Neck Strap FEATURES TM - Quick Guide / Warranty Card Power Button Noise Cancelling ON/OFF Switch USB Cover 3. WEARING EARPHONES 1) On the earphones, “L” indicates Left and “R” indicates Right.
4. CHARGING The device may be not charged upon purchase and must first be charged before use. 1) Open the USB cover on BT 220 NC and connect the provided USB charging cable. 2) Connect the provided USB charging cable with a computer (laptop) or you may also use a separately purchased USB adaptor (rating: 5V/over 500mA) to begin charging.
. PAIRING WITH A BLUETOOTH DEVICE 1) Pairing - Turn on the Bluetooth feature with the ‘Bluetooth Device’ you want to connect with the BT 220 NC. 3 feet - Place the BT 220 NC within 3 feet of the ‘Bluetooth Device’ you want to connect. - Press and hold the PLAY button for over 3 seconds with the BT 220 NC power on to enter Pairing Mode.
AVRCP–“Audio/Video Remote Control Profile” The device will not operate properly if the profiles are not supported equally. Even when the profiles are supported equally, some features may not properly operate depending on the Bluetooth device specifications. To check the detail specifications of this headphone’ s profile, refer to '17 - Product Specifications'. For more information, please visit phiaton.com or contact Phiaton customer service. 7.
3) What is ’Auto Mode’? This is a mode used to automatically reconnect both previously connected 'Bluetooth Devices' when the power is turned off and back on. 4) Using Auto Mode - Within Pairing Mode, press the (+) Button for 3 seconds to turn on Auto Mode. - If you press the (+) button for 3 seconds again, then Auto Mode will turn off and switch to Manual Mode.
11. LISTENING TO MUSIC (PLAY & CONTROL) 1) Playing Music - Shortly press the PLAY Button once to play music from the 'Bluetooth Device'. - While music is playing, shortly press the PLAY Fast Forward Button to pause the playing music. The music will be played from the paused point when playing music again. - While music is playing, pressing and holding the PLAY Button for one second will stop the playing music. The music will be played from the start when playing music again.
13. USING THE CALL FUNCTION 1) Accepting a Call - When the incoming call tone is heard through the earphones, press the CALL/POWER button. (Adjusting Call Volume: to control the call volume, - Press the (+)/(-) Button). 2) Ending a Call - While on a call, shortly pressing the CALL/POWER button to end the call. 3) Rejecting a Call - When the incoming call tone is heard through the earphones, press and holds the CALL/POWER button for about 1 second.
14. CHANGING SOUND MODE 1) When the BT 220 NC connects with the apt-X high quality sound compatible ‘Bluetooth Device’, it connects in apt-X mode automatically. 2) You can switch to SBC mode which is less draining on the battery - Press CALL/POWER button with Volume (+) button for 2 seconds when the device power on.
* The Battery Check feature will not operate while the battery is being charged. * When the battery charge is under 3%, the alarm will sound. If use is continued for several minutes the battery will be completely drained, the 'Power Off' voice guidance is provided and the power will automatically turn off. 2) Activating/Deactivating the LED Indicator - BT 220 NC is equipped with an indicator that shows operating features to provide information on operating states.
17. SPECIFICATIONS 1) Controller - Communication Network: Bluetooth standard Ver.4.0 - Output Power: Power Class 2 - Max. Communication Range: Discoverable within 10 m / 33 ft. - Full Charging Time: 1.5 Hours - Call Time (NC on / off): 10 Hours / 16 Hours - Music Play Time (NC on / off): 10 Hours / 17 Hours - Standby Time (NC on / off): 26 Hours / 300 Hours - Operating Frequency: 2.4 GHz (2.402GHz ~ 2.480GHz) - Bluetooth Profile Support: HFP v1.6 / HSP v1.2 / A2DP v1.3 / AVRCP v1.
- Check whether the Bluetooth feature within the 'Bluetooth Device' you want to connect is enabled. - Check whether the 'Bluetooth Device' you wan t to connect is within the supported range (Pairing is supported only when within 3 feet). - Check whether the Bluetooth profile within the 'Bluetooth Device' is compatible. 4) Music cannot be played: - Check whether the power of the device and 'Bluetooth Device' is on. - Check whether music is being played within the connected 'Bluetooth Device'.