Technical Support & Warranty Information Our Warranty to you: Hyphen Technology {*Phenotype) warrants Hyphen products against evident DE-fects In material and workmanship for a period of ene year from the date of original purchase for use. This warranty is valid exclusively in the US and applies only to the original owner. If you discover a defect covered by this warranty, Hyphen will repair or replace the product at our sole discretion using new or refurbished components.
. System Description + Overall System ID TCE] Carrier frequency range 520MHz 603MHz {Depends on local regulations) 1 x 8-channel UHF wireless receiver with XLR and mixed %" outputs Frequency Stability 0.
Operating Instructions ET 1 Install fresh batteries in the transmitters {fresh to the section relative to the specific transmitter you are using). 2 — Connect the AC power adapter to a wall outlet and to the back of the receiver. 3 — Screw all sight antennas in. 4 — Connect one of the nine outputs available at the back pane! to the next stage of your systems. Typically, use the X output to connect to unbalanced equipment such as consumer level receivers, amplifiers, and mixers.
@ Antenna D (@ XLR Output CH8 @ XLR Output CH? @ Antenna C (® XLR Output CHB © XLR Output CHS @ % Mixed Output ® AG Power XLR Output CHe 9 XLR Output CH3 @ Antenna B {2 XLR Output CH2 G3 XLR Output CH1 @ Antenna A Transmittal @ IR Window (Play to the infrared transmitter signal to the frequency synchronization) @ LCD display @ Power switch @ Battery compartment When tum on the transmitter, the battery power icon is on the right of the LCD display.