Thank you for purchasing the HYPHEN PRO PUT-4000 8-Channel UHF Fixed Frequency Wireless Microphone System. This manual includes a description of features and a step-by-step guide to operate the unit. Please read this manual carefully lo ensure proper use and operation, and keep it for future reference.
» Overall System Frequency range 500 960 MHz (Depends on local regulations) Frequency stability 0.003% Dynamic range > 105dB Operation temperature -10°C 50°C Frequency response 50Hz kHz Audio output level 1/4 Interface: 0 500mV; XLR Interface: 0 500mV Working distance B0mM/260ft = 8-Channel Wireless Receiver Oscillation mode PLL Synthesized Power consumption >7TW Output Impedance XLR connector: 200 ohm.
Receiver for PUT-4000 Power Switch Press the button for 1 sec to tum on salver and pass It again to tum it off (3) Volume 2 Control Adjust the volume output of sound from CH2 {8 Volume 4 Central! Adjust the volume output of sound from CH4 (D Volume § Control Dust the volume output of sound from CHE Volume 8 Control Adjust the volume output of sound from CH8 0 Channel 5 to Chan § {CH5, CHE, CHT, CHB) LOD Display 3 AF 1: CH1 audio investor 4B AF 2: CH2 audio indicator 4 AF 2: CH3 audio indicator {8 AF 4: CHS
Receiver for PUT-4000 Operating Instructions 1 Install fresh batteries in the transmitters (fresh to the section relative to the specific transmitter your are using). 2 Connect the AC power adapter to a wall outlet and to the back of the receiver.
(® Microphone capsule (2) LCD display window @ Power switch Press the power switch to turn on or tum off the microphone. @ Battery Compartment ® Battery Cover 0 When turn on the transmitter, the battery power Icon Is on the right of the LCD display. If the battery icon indicates that battery power is low, the batteries must be replaced to maintain normal operation. The Hyphen UHF body pack is to ba used with the Hyphen lavaliere microphone & headsets.