Use and Care Manual

PHENOMENAL BRANDS, Phenopatch Products

a division of DAP Products Inc.

2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Phone: 410-675-2100

Revised: 10/20/13

DAP

PHENOPATCH

Wallboard Joint Compound

 For the smooth, high quality finishing of gypsum panel joints

 Professional grade

 Sands easily

 Ready-to-use

 Interior use

Packaging: Net Weight 3 lbs, 12 lbs.

Color: White

UPC Numbers: 70798 00111, 00117

Company Identification:

Manufacturer: PHENOMENAL BRANDS, Phenopatch Products, a division of DAP Products Inc., 2400

Boston St., Baltimore, Maryland 21224

Usage Information: 1-888-327-8477 or visit dap.com and click on “Ask the Expert”

Order Information: 1-800-327-3339

Fax Number: 410-558-1068

Also, visit the Phenopatch website at www.phenopatch.com.

Product Description:

DAP

PHENOPATCH

Wallboard Joint Compound is a ready-to-use, professional-grade compound for

smooth, high quality finishing of gypsum panel joints. It can be used to cover and finish gypsum wallboard

joints, embed reinforcing tape, metal cornerbeads, screw or nail holes. It is easy to apply, has minimal

shrinkage and sands easily. Can also be used to patch and texture interior walls.

Suggested Uses:

For the smooth, high quality finishing of:

 Gypsum

 Metal

 Nailheads

 Drywall

 Panel joints

 Corner beads

PAGE 1
PHENOMENAL BRANDS, Phenopatch Products a division of DAP Products Inc. 2400 Boston Street, Suite 200, Baltimore, Maryland 21224 Phone: 410-675-2100 Revised: 10/20/13 DAP® PHENOPATCH® Wallboard Joint Compound      For the smooth, high quality finishing of gypsum panel joints Professional grade Sands easily Ready-to-use Interior use Packaging: Color: UPC Numbers: Net Weight 3 lbs, 12 lbs.
PAGE 2
Surface Preparation & Application: 1. Surface should be clean, firm and free of debris and dust particles. 2. Prepare surface by recessing nails into panels 1/32”. 3. Stir thoroughly before use. 4. Apply compound evenly with a clean putty knife. Fill space between panels, covering an area of at least 2-4 inches on either side of joint. 5. Immediately center and embed wallboard joint tape over joint and press into wet compound with a 5” putty knife. 6.
PAGE 3
Clean Up & Storage: Wash tools and hands immediately after use with water. Dried compound must be cut, scraped or sanded away. Be sure container lid is closed and tightly sealed. Store in a cool, dry place away from extreme heat or cold. Safety: See product label and Safety Data Sheet (SDS) for safety information. You can request an SDS by visiting www.phenopatch.com or by calling 1-888-327-8847. Contains: Calcium carbonate and crystalline silica. May be harmful if inhaled.