Use and Care Manual

rrrrrrrrr PHENOMENAL BRANDS, Phenopatch Products

a division of DAP Products Inc.

2400 Boston Street, Suite 200, Baltimore, Maryland 21224

Phone: 410-675-2100

Revised: 10/20/13

DAP

PHENOPATCH

Pre-Mixed Concrete Patch

 Repairs cracks and breaks in concrete and mortar surfaces and joints

 Dries to a durable, hard finish

 Non-shrinking

 Ready-to-use

 Easy water clean-up

 Interior/exterior use

Packaging: 32 fl. oz., 1 Gallon

Colors: Gray

UPC Numbers: 70798 32611, 32617

Company Identification:

Manufacturer: PHENOMENAL BRANDS, Phenopatch Products, a division of DAP Products

Inc., 2400 Boston St., Baltimore, Maryland 21224

Usage Information: 1-888-327-8477 or visit dap.com and click on “Ask the Expert”

Order Information: 1-800-327-3339

Fax number: 410-558-1068

Also, visit the Phenopatch website at www.phenopatch.com.

Product Description:

DAP

PHENOPATCH

Pre-Mixed Concrete Patch is a high-strength, latex-based patching

compound specifically formulated to quickly repair small cracks and breaks in concrete and masonry. It

may be used to patch or spot level interior or exterior concrete and masonry surfaces such as basement

walls, patios, steps, sidewalks and driveways. It dries to a durable, hard finish and provides a non-

shrinking, waterproof patch. Paintable with most latex and oil-based paints.

Suggested Uses:

For filling, repairing and spot leveling small cracks, chips, breaks and other imperfections in:

 Sidewalks

 Patios

 Basement walls

 Concrete steps

 Other concrete

surfaces

 Driveways

PAGE 1
rrrrrrrrr PHENOMENAL BRANDS, Phenopatch Products a division of DAP Products Inc. 2400 Boston Street, Suite 200, Baltimore, Maryland 21224 Phone: 410-675-2100 Revised: 10/20/13 DAP® PHENOPATCH® Pre-Mixed Concrete Patch       Repairs cracks and breaks in concrete and mortar surfaces and joints Dries to a durable, hard finish Non-shrinking Ready-to-use Easy water clean-up Interior/exterior use Packaging: Colors: UPC Numbers: 32 fl. oz.
PAGE 2
Adheres to:  Concrete  Mortar  Masonry    Cinderblock Stone Brick  Wood Surface Preparation & Application: 1. Surface must be structurally sound, clean & free of debris, chemical concrete-curing compounds and any other foreign material. 2. Use a wire brush to clean the area to be patched, removing any paint or glossy finishes. 3. Stir contents thoroughly, no thinning is required. 4. Dampen the area to be repaired. 5.
PAGE 3
Clean Up & Storage: Wash tools immediately after use with water. Dried compound must be cut or scraped away. Be sure container is closed and tightly sealed. Store container in a cool, dry place away from extreme heat or cold. Safety: See product label and Safety Data Sheet (SDS) for safety information. You can request an SDS by visiting www.phenopatch.com or by calling 1-888-327-8847. Contains: Calcium carbonate. May be harmful if inhaled. May cause eye, skin and respiratory irritation.