Manualshelf

User's Manual

ManualsBrandsPhaiser Electronics ManualsAudio EquipmentTrue Wireless Stereo Bluetooth Headset
12
■ProductmodelNo.:PhaiserFusionOne
■Drivesystem:Hybrid(dynamic&balancedamateurdrivers)
■Drivers:Dynamic(x1)andbalancedamateur(x2)
■On-boardSoC:QualcommQCC3020
■Driversize:9mm(dynamic)
■Built-inmicrophoneforcalls:MEMSmicrophone
■Playfrequency:20Hz-20kHz
■Maximumcalltime:5hours
■Maximumplaybacktime:7hours
8
Specifications
6
Operation Overview
7
LED Indications
*The indications might not work with certain devices.
Power
Volume
Replay
Poweron
Poweroff
Stop
Nextsong
Previoussong
Acceptacall
Endacall
Turnupthevolume
Turndownthevolume
Rejectacall
Holdfor1secondandletgo
Holdfor4secondsandletgo
Pressonce
Pressonce
Presstwice
Pressthreetimes
Pressoncewhenreceivingacall
Pressonceduringacall
Pressthreetimes
Presstwice
Pressandholdfor1secondwhenreceivingacall
−
−
−
−
Music
Calling
L R
Activate
Siri・Google
Pressandholdfor
approximately2seconds
Pressandholdfor
approximately2seconds
●Power on: Remove the earphones from the charging
case. When you have done so, the earphones will
automatically power on.
If you do not have the charging case around you,
press and hold down on the button on each earpiece
for about 1 second and let go. (The LED indicator will
flash in blue, and the device will say "power on".)
 
● Power off: Press and hold down on the button on
both the left and right earpiece for about 4 seconds
and let go. (The LED indicator will flash in red and you
will hear the device say "power off".)
Once the earphones are paired with the
device, you can just take out the earphones
from the case and they will connect to the
smartphone automatically.
1. Take out both earphones from the charging case and
turn on the power.
2.Turn on Bluetooth on your device.
3.Quickly push the button twice on the left
earpiece. (The LED indicator will flicker in red
and blue and you will hear the device say "pairing".)
4.when you see it appear on the yourdevice.
5.You will then see “Phaiser Fusion One connected”on your device.
Then, a pop-up window will appear on your device with the
message "Request for Bluetooth pairing". Select "pairing".
6.Pairing of the earphones with your device will been
established if you see the following message on your
device.
Example: When connecting the left earpiece to your mobile
device, you will berequired to pair the earpiece to your
device if you have never done so before.
* Depending on the device and the OS version of the
device you are using, the handset may display the word
"Headset" on the screen.
Please be assured that there
are no technical issues when this has happened.
1
4
Pairing
Connect the USB connector of the charging cable to
the USB port of the charging case, connect the USB
(A) connector to a USB charging adapter, and then
insert the unit into the case to start charging.
3
Charging
Thank you for purchasing the True Wireless
Earphones. Before using it, please read this manual.
User Manual
Power ON/OFF
2
manual:
:v1.01
-2- -3- -4- -5-
-6- -7- -8- -9- -10- -11-
Poweron
Poweroff
Whenmakingacall
Whenreceivingacall
Duringacall
Main earphone
LEDindicatorflickersinblue
RedLightONfor1second
LEDindicatorflickersinblueevery3seconds
LEDindicatorflickersin
blueevery3seconds
LEDindicatorflickersin
blueevery3seconds
LEDindicatorflickersin
blueevery3seconds
LEDindicatorflickersin
blueevery3seconds
Pairingmode
LEDindicatorflickersin
redandbluealternatively
LEDindicatorflickersin
blueevery5seconds
Whencharging
LEDindicatorlightsupinred
Whenfullycharged LEDindicatorblinksinredonceandextinguishes
Subsidiary earphone
●Chargingtheearphones
Charging will begin when the earphones have been
placed in the charging case. ※ If the earphones are
placed in the charging case without being switched off,
the earphones will automatically switch themselves
off.When the earphones have been removed from the
charging case, the earphones will automatically switch
themselves on.
※
In the event that the charging case itself runs out of
battery while charging the earphones, the earphones
will automatically connect to a device with which they
have previously been paired. Please be assured that
there are no technical issues when this has happened.
Please charge the charging case on a regular basis.
When connected, the built-in battery in the charging
LED
Battery life
1〜25％
25〜50％
50〜75％
75〜100％
In the event that you are unable to pair the earphones
with your device, or that the earphones flicker or 
produce sounds that are not described in this user
manual, please reset the earphones following the
instruction below.
[Reset procedure]
1.Delete the Bluetooth settings on the connected
device.
2.With the power off, press and hold down on the
button on one side of each earphone for about 10
seconds. If you reset only one of the earphones, you
will not be able to pair both of them to your device, so
be sure to hold down on the button on both earphones
when resetting. Finally, let go when your see the LED turn
red, then the resetting procedure will have been completed.
●Reset procedure
5
Charging Case Features
●Chargingthebuilt-inbattery
Pairing - Basic operation
video, please load here
※Whenusingapt-Xcodec,
 playbacktimewillbeshortenedbyabout20to30%.
■Chargingtime:2hours
■Correspondingcodec:SBC,AAC,aptX
■Correspondenceprofile:A2DP,AVRCP,HFP,HSP
■Chargingport:USB
■Waterproofstandard:IPX5
■Bluetoothversion:5.0
■Bluetoothmultipairing:upto7devices
■Bluetoothmultipoint:1device
Nomenclature
case will begin to charge. The battery indicator will
flash while the charging case is being charged.
Warranty
This product warranty covers any operational malfunction under
normal use. In such a case, the product will be replaced free of
charge. When requesting any servicing, present a proof of
purchase such as the purchase receipt with the date, delivery slip,
etc.
1. The warranty period is one year from the date of purchase. The
warranty is valid only in the country (or the region) where you
purchased. For more details, please find the warranty card
attached by our distributor if any. NOTE: subject to the
country/region of the distributor.
2. The warranty is not applicable in any of the following cases:
a. The product has not been registered through our online form.
b. Absence of the purchase receipt, delivery slip, or other proof of
purchase from the dealer.
c.Malfunction due to product misuse (including breakage by
excessive force and burnout), neglect (fall or physical shock, etc.),
or improper storage.
d. The product has been repaired or modified by an unauthorized
person.
e. Consumables are not covered by the warranty.
f. Malfunction caused by another device.
g. Any scratches on the product or plug after purchase.
h. Any problems caused by using a power source or voltage that
does not suit the product.
3. Non-Aviot products are not covered by the warranty even if they
are the same.
<Disclaimer>
The warranty does not cover any problems or malfunctions with
the product caused by incorrect use or operation. It also does
not cover any problems or malfunctions caused by rough
handling, physical shock, etc., during delivery to customer or by
any lightning, fire, or exposure to water exceeding the
waterproof rating. This product is not guaranteed to work with
all devices. Aviot shall not be held liable for any malfunctions or
problems with any device used with this product nor for any loss
of data. Also, Aviot shall not be held liable for any malfunctions
or problems with any personal computer, OS, software, or other
device nor for any loss of data in any device.
The same applies for any problems caused by lightning or fire
or other disaster. The warranty is valid only in the country (or
the region) where you purchased. "For more details, please find
the warranty card attached by our distributor if any. NOTE:
subject to the country/region of the distributor.
4. During any product repair or replacement, Aviot does not
provide any temporary substitute product.
5. If it is judged as out of warranty, the customer shall bear the
shipping cost to and from our repair center.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits aredesigned to provide
reasonable protection against harmful interference in a
residential installation.This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for
help
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
* This feature might not work with some devices.
FCC ID:
True Wireless Stereo Bluetooth Headset
Model:Phaiser Fusion One
2ATRCBHS1010

Summary of content (2 pages)