User Manual

As shown, put
battery(CR2032) into the
battery battery compartment.
Install introductionOverview How to wear P1 for pet Begin to experience Services and support
Screw the battery cover
with the opener clockwise
to the end.
After battery cover was
complete closed, the LED
indicator in the front will blink
three times. That means P1
start working.
Close the battery cover align
to the anchor shown in below
figure.
Put the one side of P1 into
accessory.
Put the band in one side of
accessory as shown in below
figure.
Pull the band cross over the
pet collar and end at the
other side of accessary.
Push the other side of P1 till
hearing the sound of click.
Scan to download PETKIT from app
store for ios devices and google
player for android devices.
P1 is IP67 dust and water resistant. That means your pet
can wear P1 when swimming or bathing.
P1 has well-tuned power consumption performance. One
cell-battery can last for 4 month in normal usage frequency .
P1’s wireless solution is based on Bluetooth 4.0 low energy
technology.
All the materials used by P1 is recyclable.
Please put the empty battery to battery collection point.
Scan to join PETKIT‘s
after-sales services
(available for “WeChat”
users).
Get more information
from website.