Specification Sheet

Toll Free: 87 PERMATEX
(877-376-2839)
10 Columbus Blvd., Hartford,
Connecticut 06106
6875 Parkland Boulevard, Solon
Ohio 44139
Technical Data Sheet
Permatex

Thread Sealant with
Teflon

AAM Revised 09/02
NOT FOR PRODUCT SPECIFICATIONS.
THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION.
PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX)
PRODUCT DESCRIPTION S.I.N.: 834-300
Permatex

Thread Sealant with Teflon

is a smooth white
paste with a slight alcohol odor. It is a fast acting
paste/lubricant designed to seal pipes, fittings and threaded
connections against leakage and loosening. Seals pressure to
working rating of pipe in air, oil, gas and hydraulic systems.
Lubricates threads for quick, easy assembly and disassembly.
Prevents galling and corrosion. Will not tear or shred like
tapes. Remains pliable through a wide temperature range and
outperforms other pipe dopes.
PRODUCT BENEFITS
• Easy to use
• Non drip formula
• Effective up to 5000 psi
• Good heat resistance
• Temperature range –65
ºF to +300ºF(-54ºC to +204ºC)
TYPICAL APPLICATIONS
• Air conditioning fittings
• Temperature sending fittings
• Hydraulic fittings
DIRECTIONS FOR USE
1. Threads must be free of dirt and corrosion.
2. Apply to male threads.
3. Force sealant into the thread grooves with brush or
spatula.
4. Assemble parts.
5. Adjustments can be made up to 24 hours after
application without damage to seal.
6. Remove excess wet sealant by wiping with a dry cloth.
Dried sealant can be peeled off.
PROPERTIES OF UNCURED MATERIAL
Typical Value
Chemical Type Polymeric material
Appearance White, smooth paste
Odor Slight alcohol
Specific Gravity @ 77ºF 1.12
Viscosity Paste
Flash Point, TCC, ºF 74
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
Ordering Information
Part Number Container Size
80631 (14AR) 1 oz. tube, carded
80632 (14H) 4 oz. can
80633 (14D) 16 oz. can
STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8°
to 28°C
(46°
to 82°F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range. To prevent
contamination of unused product, do not return any material to
its original container.
NOTE
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. Permatex, Inc. specifically
disclaims all warranties expressed or implied, including
warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Permatex, Inc.
products and disclaims any liability for consequential or
incidental damages of any kind, including lost profits.
This product may be covered by one or more United States or
foreign patents or patent applications.