Specification Sheet

Toll Free: 87 PERMATEX
(877-376-2839)
10 Columbus Blvd., Hartford,
Connecticut 06106
6875 Parkland Boulevard, Solon
Ohio 44139
Technical Data Sheet
Permatex
Nickel Anti-Seize
Lubricant
AAM Revised 10/02
NOT FOR PRODUCT SPECIFICATIONS.
THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION.
PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX)
PRODUCT DESCRIPTION S.I.N.: 834-300
Permatex
Nickel Anti-Seize Lubricant is a high temperature,
high quality, heavy duty lubricant that resists galling and
corrosion and reduces wear in heavy pressure applications. It
contains tenacious metals, oils and graphite materials that
cannot be burned away or removed by slow moving parts.
This product withstands temperatures ranging from -65°F to
2400°F (-54°C to 1316°C). It is recommended for use where
copper contamination must be avoided, under conditions of
extreme pressure and temperature and with stainless steel,
titanium and nickel alloys.
PRODUCT BENEFITS
Permatex
Nickel Anti-Seize was designed specifically for
use on stainless steel or similar alloys. It protects threaded
fasteners and fittings from heat, freezing, seizure or galling at
temperatures from -65°F to 2400°F. It may be used on
pumps, sensors, valves, nuts and bolts where extreme
conditions of heat exist.
TYPICAL APPLICATIONS
Exhaust manifold bolts
Exhaust system bolts
Muffler clamps
Tailpipe assemblies
Catalytic converter assemblies
DIRECTIONS FOR USE
1. Clean mating surfaces before application.
2. For best results, apply to clean, dry surfaces.
3. Clean surfaces with Permatex
Brake & Parts Cleaner.
4. Wire brush any loose surface rust.
5 Apply Nickel Anti-Seize to the parts that require
protection.
6. Reassemble parts using normal torque values.
7. Wipe off excess material.
For Cleanup
1. Clean parts with disposable towel.
2. Clean hands with Permatex
brand hand cleaners.
PROPERTIES OF MATERIAL
Typical Value
Chemical Type Mineral oil, nickel, graphite
Appearance Gray paste
Odor Petroleum
Specific Gravity 1.1
Temperature Range,
_
C (
_
F) -54(-65) to 1316(2400)
Viscosity, cPs 200,000 (base)
Flash Point, °C(°F) 93(200)
NFPA 704 Flammability Rating 1
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
ORDERING INFORMATION
Part Number Container Size
77124 8 oz. brush-top bottle
77164 16 oz. brush-top bottle
STORAGE
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8
_
C to 28
_
C
(46
_
F to 82
_
F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range.
NOTE
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. Permatex, Inc. specifically
disclaims all warranties expressed or implied, including
warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Permatex, Inc.
products and disclaims any liability for consequential or
incidental damages of any kind, including lost profits.
This product may be covered by one or more United States or
foreign patents or patent applications.

Summary of content (1 pages)