Assembly Instructions

ManualsBrandsPerformax ManualsGarage & Outdoor Storage108"W x 86"H x 24"D Black 7-Piece Garage Storage Cabinet System

USE AND CARE GUIDE

Questions, problems, missing parts?

Before returning to the store, call

9 a.m – 5 p.m., CST, Monday-Friday

1-866-441-5080

Item # 211-4758 Model # M27BC

Item # 211-4759 Model # M27BCTB

Item # 211-4760 Model # M27BCTR

Item # 211-4761 Model # M27BCW

Assembly Instructions

27 IN 2-Door Base Cabinet

Summary of content (7 pages)

PAGE 1
Assembly Instructions Item Item Item Item # # # # 211-4758 211-4759 211-4760 211-4761 Model Model Model Model # # # # M27BC M27BCTB M27BCTR M27BCW USE AND CARE GUIDE 27 IN 2-Door Base Cabinet Questions, problems, missing parts? Before returning to the store, call 1-866-441-5080 9 a.m – 5 p.m.
PAGE 2
Table of Contents Table of Contents .................................................. 2 Assembly ............................................................... 5 Safety Information ............................................... 2 Operation .................................... .......................... 6 Warranty ................................................................ 3 Maintenance.......................................................... 7 Specifications ..................................
PAGE 3
Limited Lifetime Warranty PERFORMAX® Tool Cabinets and Chests are warranted to be free from defects in materials and workmanship under normal use for the lifetime that you own the product. If any part of the product is found to be defective during normal use, the defective product or part will be replaced at our discretion. This warranty does not cover products that are damaged through accident, abuse, misuse, commercial/industrial applications or neglect.
PAGE 4
Package Contents (continued) NOTE: Cabinet Keys are inside shelf.
PAGE 5
Assembly 2 Attaching the bumpers CAUTION: Two people are recommended for assembly. 1 Attaching the casters □ □ □ □ □ □ Position the bumpers (B) over the corner holes. Insert 2 bolts (BB) into bumper holes and tighten with supplied Hex key (CC). Do not over tighten. Be sure the doors are locked and lay the cabinet (A) back Attach the swivel casters with brake (D) on the front of the unit inserting four bolts (AA) per caster into the cabinet (A). A B Tighten with supplied hex key (CC).
PAGE 6
Operation 1 Removing the sliding tray □ □ □ 2 Sliding tray height adjustment Fully extend the empty sliding tray. Push up the one release lever while pulling down on the other release lever. Pull the tray outward until it is released from the tray slide. 3 Re-inserting the sliding tray □ □ □ Extend the tray slides. Insert the brackets on each side of the tray into the slots in the slides, being careful that they are properly positioned.
PAGE 7
Maintenance 1 2 Caster maintenance □ Drawer maintenance □ Grease the casters annually using high-quality bearing grease. □ □ Periodically clean the drawer fronts, drawer trim, and other surfaces with a mild detergent and water. Lubricate the slides semi-annually with high-quality bearing grease. Replacement Parts For assistance with replacement parts please call 1-866-441-5080.