Specifications

ManualsBrandsPEPWAVE ManualsElectronicsPEPWAVE / peplink Wireless Product

OPYRIGHT

RADEMARKS

are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.

Name

Admin

Password

This field allows you to specify a new administrator password.

Confirm Admin

Password

This field allows you to verify and confirm the new administrator password.

Web Session

Timeout

A web login session will be logged out automatically when it has been idle longer than the

Web Session Timeout

Unlimited session timeout: 0 hours 0 minutes

Default: 4 hours 0 minutes

Security

This option is for specifying the protocol(s) through which the web admin interface can be

accessed:

HTTP

HTTPS

HTTP/HTTPS

Web Admin

Port

This field is for specifying the port number on which the web admin interface can be

accessed.

Allowed

Source IP

Subnets

This option is for specifying the IP subnets through which the web admin interface can be

accessed.

Language

Set language of the Web Interface

9.2 Firmware

There are two ways to upgrade the unit. The first method is through an online download. The

second method is to upload a firmware file manually.

To perform an online download, click on the Check for Firmware button. The Access Point will

check online for new firmware. If new firmware is available, the Access Point automatically

Summary of content (15 pages)

PAGE 1
Name Admin Password Confirm Admin Password Web Session Timeout This field allows you to specify a new administrator password. This field allows you to verify and confirm the new administrator password.
PAGE 2
downloads the firmware. The rest of the upgrade process will be automatically initiated. You may also download a firmware image from the Peplink website and update the unit manually. To update using a firmware image, click Choose File to select the firmware file from the local computer, and then click Manual Upgrade to send the firmware to the Access Point. It will then automatically initiate the firmware upgrade process.
PAGE 3
9.4 Event Log Event log functionality enables event logging at a specified remote syslog server. The settings for configuring the remote system log can be found at System>Event Log. Remote Syslog Settings Remote Syslog This setting specifies whether or not to log events at the specified remote syslog server. Remote Syslog Host This setting specifies the IP address or hostname of the remote syslog server. Port: Default 514 9.
PAGE 4
SNMP Settings SNMP Device Name SNMP Port This field shows the router name defined at System>Admin Security. This option specifies the port which SNMP will use. The default port is 161. SNMPv1 This option allows you to enable SNMP version 1. SNMPv2 This option allows you to enable SNMP version 2. SNMPv3 This option allows you to enable SNMP version 3.
PAGE 5
SNMPv3 User Settings SNMPv3 User Name Authentication Protocol This setting specifies a user name to be used in SNMPv3. This setting specifies via a drop-down menu one of the following valid authentication protocols: ˗ HMAC-MD5 ˗ HMAC-SHA Authentication Password Password for SNMPv3 authentication. Confirm Authentication Password Confirm password for SNMPv3 authentication.
PAGE 6
9.6 Controller Option to choose the controller for the Access Point.
PAGE 7
9.7 Configuration Backing up your Pepwave Access Point settings immediately after successful completion of the initial setup is strongly recommended. The functionality to download and upload Pepwave Access Point settings is found at System>Configuration. Configuration Restore Configuration to Factory Settings The Restore Factory Settings button is to reset the configuration to factory default settings.
PAGE 8
9.8 Feature Add-Ons Some Pepwave Access Points models have features that can be activated upon purchase. Once the purchase is complete, you will receive an activation key. Enter the key in the Activation Key field, click Activate, and then click Apply Changes. 9.9 Reboot Restart the Access Point with the Reboot button. For maximum reliability, the Pepwave Access Point can contain two copies of firmware; each copy can be a different version.
PAGE 9
.10 Tools > Ping The ping test tool tests connectivity pinging the specified destination IP address. The ping utility is located at System>Tools>Ping. 9.11 Tools > Traceroute The traceroute test tool traces the routing path to the specified IP address. The traceroute test utility is located at System>Tools>Traceroute. COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are trademarks of Peplink.
PAGE 10
9.12 Tools > Nslookup The nslookup tool is used to test DNS name servers. The nslookup utility can be found at System>Tools>Nslookup. 10 Status The displays available on the Status tab help you monitor device data, client activity, rogue device access, and more. 10.1 Device COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are trademarks of Peplink.
PAGE 11
System Information Device Name Model Hardware Revision Serial Number Firmware Host name Uptime System Time This is the name specified in the Router Name field located at System>Admin Security. This shows the model name and number of this device. This shows the hardware version of this device. This shows the serial number of this device. This shows the firmware version this device is currently running. This shows the hostname of the device. This shows the length of time since the device has been rebooted.
PAGE 12
to control the amount of data displayed. 10.3 WDS Info Here you can monitor the status of your wireless distribution system (WDS) and track activity by MAC address. This section will display information for both the 2.4GHz and 5GHz radios. 10.4 Portal If you’ve turned on your access point’s captive portal, client connection data will appear here. Use the Expand and Collapse buttons to control the amount of data displayed. 10.
PAGE 13
10.6 Event Log The Event Log displays a list of all events associated with your access point. Check Auto Refresh to refresh log entries automatically. Click the Clear Log button to clear the log. 11 Restoring Factory Defaults To restore the factory default settings on a Pepwave AP One router, follow the steps below: 1. Locate the reset button on the front or back panel of the Pepwave AP One router. 2. With a paperclip, press and keep the reset button pressed.
PAGE 14
All previous configurations and bandwidth usage data will be lost after restoring factory default settings. Regular backup of configuration settings is strongly recommended. 12 Appendix 1. The device supports time division technology 2. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules.
PAGE 15
5HVWULFWLRQ 6WDWHPHQW 7KH 0+] %DQG LV DOORFDWHG IRU LQGRRU XVH RQO\ LQ (8 PHPEHU FRXQWULHV FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.