G4 DVR-M11N-RPH Userr Manual - * *< <8 3 3 4 4 8 86.
G4 DVR-M1N-RPH User Manual Document Type General Product Planning Document Internal use Version 111 pages in total V1.1 Revision History Auth Date Revision Version Description or 2021-07-10 V 1.0 G4 DVR-M1N-RPH User Manual Draft 2021-08-20 V1.
G4 DVR-M1N-RPH User Manual &RQWHQWV 1 Overview .................................................................................................................................. 4 1.1 System Introduction ................................................................................................... 4 1.2 Function Overview..................................................................................................... 4 2 Display and Operations ...........................................
G4 DVR-M1N-RPH User Manual 1 Overview G4 DVR-M1N-RPH User Manual is intended to introduce the powerful functions of the device system and help users get a better understanding of these functions and their operations. Please note that only professional O&M personnel can set the device. Streamax reserves the right of final interpretation of this document and the right to modify this document or information and descriptions therein. The contents of the manual are subject to change without further notice. 1.
G4 DVR-M11N-RPH Userr Manual and truth reestoration 3. Inteegrating 3G//4G, Wi-Fi, Bluetooth, G-Sensor, and other modules m to pprovide variious functions; G positionning technoology to reco ord the vehiicle track inn real time for f 4. Adoopting the GPS backgroundd analysis 5. Twoo SD cards for f video sttorage, eachh with a max ximum capaacity of up tto 256 GB; 6.
G4 DVR-M1N-RPH User Manual 2.2 Control via a Mouse Connect a mouse to the USB port to operate on the CP4 panel. There will be a mouse cursor on the screen after the mouse connection. x When the device is split into 4/9 screens, double-click the left mouse button to expand and display only one of the screens; x To select or perform other operations, click the left mouse button; x Click the right mouse button to display the bottom menu. 2.
G4 DVR-M1N-RPH User Manual x Tap (or right-click with your mouse) any place on the screen to display the bottom menu bar; x Information can be added and displayed on the live view screen, including Date/Time, Speed, Vehicle Plate, GPS, Alarm, Channel Name, Vehicle Num, and ACC Info; you can set whether to display the added information and the position where the information is displayed in Live OSD. See Section 3.5.2.1.3 for details. x Single: Tap Single to switch between video channels.
G4 DVR-M1N-RPH User Manual 3.1.3 9-Split 9-Split: On the live view screen, tap 9-Split to display the videos of nine channels. The screen only displays the videos of channels accessed by a camera, as shown in the following figures. Double-tap a channel on the screen to expand and display it. Double-tap again to return to the 9-split layout. 3.1.
G4 DVR-M1N-RPH User Manual The playback starts from the point of 2 minutes ago from the current time. If the video is previewed on one split screen, it will be played back on the single split screen; if videos are previewed in the 9-split layout, videos of the first four channels will be played back.
G4 DVR-M1N-RPH User Manual Dial: x You can set on the platform whether to allow the device to call back via monitoring (the terminal cannot turn on the speaker). Contacts: x Contacts cannot be created on the device. Records: x Records provide the same function as a phone. It records answered, missed, and outgoing calls. 3.1.5.2 SMS On the live view screen, tap Biz Menu > SMS to go to the following screen, on which you can read messages. SMS includes Read Msg and UnRead Msg.
G4 DVR-M1N-RPH User Manual 3.1.5.3 System On the live view screen, tap Biz Menu > System to go to the following screen, on which you can view information of the device, including Version Info, Modules, Server Status, Environment, and Storage. Version Info: displays Device Name, Device ID, Serial Num, MAC Address, Firmware Version, MCU Version, and CP4 Version. The MAC address can be modified. To do so, tap the input box and modify the address on the screen displayed, as shown in the following figure.
G4 DVR-M11N-RPH Userr Manual Server Status: dispplays the coonnection status and infformation of o the connected server.. If multiplee servers are configured, tap the and o the rightt side of the screen to vview the con on nnection status of eaach server. Enviroonment: dispplays Main Voltage, Device Temp perature, andd other information.
G4 DVR-M1N-RPH User Manual Storage: displays the storage status of the SD cards on the device. Functions available on this screen include: x Storage Type: the type of storage the device is using; it supports dual hard disks and dual SD cards. x Status: current recording status. x Free/Total: storage's current available capacity and total capacity. x Remain Time: time for the remaining capacity to store recorded video (calculated automatically using the N9M bitrate calculator) 3.1.
G4 DVR-M1N-RPH User Manual x Select a username and enter the password. If the password is correct, you will go to the Settings screen; otherwise, enter again after the error message is prompted. x The password can be set to null. In that case, you can log in without entering a password. x Language: enables you to set the display language of the CP4.
G4 DVR-M1N-RPH User Manual On the screen, you can view system-related information, search videos and logs, perform settings, and log out. 3.2 System On the live view screen, tap Login Avatar > System to go to the following screen: The content displayed on the screen is the same as those in Section 3.1.5.3 and is not described here. 3.3 Video Search 3.3.
G4 DVR-M1N-RPH User Manual In the calendar, the color of the strip under a date indicates that videos were recorded on that day. Where, No colored strip No video recorded on that day Green Normal videos recorded on that day Red Alarm videos recorded on that day Yellow Alarm videos recorded on that day and file automatically locked (videos locked) Source of videos can be selected: main recording, sub-recording, and mirrored recording.
G4 DVR-M11N-RPH Userr Manual 2) Select Normal N to search for alll videos exccept for alarrm videos; 3) Select Alarm A to seaarch for alarrm videos only; o 4) Select Lock L to searrch for lockked alarm viideos only.
G4 DVR-M1N-RPH User Manual 2) Tap and buttons on the right to view details of videos in each channel; 3) Check a channel (or more) and select the timeline(s) to playback or export the videos in the channel(s) at the selected time. 3.3.2 Video Export You can either export video files to a connected USB peripheral or remove the SD card to export or playback the videos on a PC using professional software. The data can be exported as comprehensive data or AVI data.
G4 DVR-M1N-RPH User Manual 3.3.
G4 DVR-M11N-RPH Userr Manual Operattions that can be perfoormed on thhe Playback k screen include volum me adjustment/mute/fast forward/fasst reverse/pause/speed setting (sloow: 1/2×, 1/4×, 1 1/8×, and 1/16×;; fast: 2×, 4×, 4 8×, andd 16×)/variabble-speed pllay/back/chaannel switching and drragging the timeline. To swiitch betweeen channels,, tap < or > on the rightt. 3.4 Logg Search The Loog Search screen s recorrds and dispplays all alarrm events and a logs of llogin and otther operations.
G4 DVR-M11N-RPH Userr Manual Screen desccriptions: x Starrt Time/Endd Time: Seleect the start//end time off log files too be searcheed; x Logg Type: Opeeration Log, Alarm Logg, and Lock Log.
G4 DVR-M11N-RPH Userr Manual videeo files by tapping t the buttoon after the logs. Descriptionns of the Alaarm Log seaarch screen: x Alarrm Type: All, A IO, Paneel, Speedingg, etc. x Logg informatioon includes: 1) Log tim me: the time period wheen the eventt happened; 2) Log nam me: descripption of the event; e x Pagges can be tuurned to seaarch logs. Taap or to movve to the preevious or neext page. All the log filess of the seleected day caan be exportted.
G4 DVR-M1N-RPH User Manual 3.5.1 Basic Setup 3.5.1.1 Regist Info The function is used to set the registration information of the device.
G4 DVR-M1N-RPH User Manual x Serial Number: the serial number of the device x Driver ID: the driver ID information x On the Vehicle Info screen, you can set the Vehicle Plate, Vehicle Num, and Line Number. x On the Driver Info screen, you can set the driver's personal information, including Driver Number, Driver Name, and Plate Colour.
G4 DVR-M1N-RPH User Manual 3.5.1.2 Time Setup 3.5.1.2.1 General On the live view screen, tap Login Avatar > Setup > Basic Setup > Time Setup > General, as shown in the following figure: x Data Format: YEAR-MONTH-DAY/MONTH-DAY-YEAR/DAY-MONTH-YEAR. The format only reflects on the live view screen or in the video recording OSD. x Time Format: 24 Hours or 12 Hours.
G4 DVR-M1N-RPH User Manual the video recording OSD. x Time Zone: supports the selection of time zones. 3.5.1.2.2 Time Sync The time will be synchronized automatically when there is a deviation between the system time and the actual time. With the Time Sync function, you can enter the date and time manually, or set the mode for time calibration. On the live view screen, tap Login Avatar > Setup > Basic Setup > Time Setup > Time Sync, as shown in the following figure: x GPS Satellite time calibration.
G4 DVR-M1N-RPH User Manual 3) After a failure, to continue the time calibration until success. 3.5.1.2.3 DST As only some foreign countries adopt daylight saving time, the DST function is enabled only when the language is English. For some regions, you need to set the DST due to the time zone reason. Specifically, you can set the start & end time, and offset in weeks or days.
G4 DVR-M1N-RPH User Manual x ON/OFF Mode: Ignition, Timing, Ignition/Timing. 1) Ignition: starts the device with the car key. 2) Timing: allows you to set the device uptime from the start time to the end time (format: HH:MM:SS). 3) Ignition/Timing: indicates that the device is on when either of the ignition and timing conditions is met and is off when both conditions are met.
G4 DVR-M1N-RPH User Manual Ignition Delay, then the countdown shutdown time prompts on the live view screen, with the delay time range from 0 to 86,399 seconds. 2) If the operation screen stays on the Setup screen, it will not enter the countdown, until exiting and returning to the live view screen. x Timer: 1) The function is enabled only in the ON/OFF Mode of Timing or Ignition/Timing; 2) Fill in the time and the device will start and shut down at the fixed time.
G4 DVR-M1N-RPH User Manual the purpose of protection. For G4 DVR-M1N-RPH, the device has a door: 1) The device will not be off when the USB flash drive or EasyCheck App is connected after opening the door; 2) After opening the door, there is a 20-second waiting time when operation can be performed, and after 20 seconds, the device will be off. 3.5.1.3.3 Sleep The function is used to set the Sleep Mode after shutdown.
G4 DVR-M1N-RPH User Manual x Sleep Mode: 1) No Consumption Standby: After the device shutdown in flameout or at a fixed time, the system will not be awakened in the Sleep Mode. 2) Low Power Standby: After the device shutdown in flameout or at a fixed time, the system can be awakened by the IO alarm and start MDVR. x Low Volt Protect The function is designed to protect the battery from being drained after the voltage of the external power supply is lower than a certain value.
G4 DVR-M1N-RPH User Manual work. x The device is in the non-working status of the complete machine when the detected voltage is lower than the Disable protection level. x After the voltage is restored, the device will not be awakened. The device uses 10V as the judgment condition for enabling Disable / Low Volt Protection by default, and the switch of the car key is the same as the above two requirements.
G4 DVR-M1N-RPH User Manual ؍User Accounts: 1) Users are divided into two groups, Admin and Normal User; 2) In the initial login, there is one Admin account and one Normal User account by default; 3) It allows to reset the password and add or delete accounts. 4) Up to one Admin account and two Normal User accounts can be set up.
G4 DVR-M1N-RPH User Manual Account Default User Type Permission Password admin admin Admin Administrator with all permissions user user Normal User All functions except Setup and Smart Traffic x Idle Time: Idle Time refers to the interval between the login and re-login to open the Setup screen after a period of time. The interval can be 30 s, 1 min, 3 min, 5 min, 10 min, and never. x Add User In the User Setup screen, you can add normal users.
G4 DVR-M1N-RPH User Manual 3) The User Name cannot be null, or the same name as existing users. 4) The Password can be null. 5) After filling in the blank, tap the "OK" button to return to the User Setup screen and then tap the "Save" button. x Edit User In the User Setup screen, the User Name and Password can be edited.
G4 DVR-M1N-RPH User Manual In the User Setup screen, normal users can be deleted. Tick the user that requires deleting, tap the "Delete" button, confirm with the "Yes" button and then tap the "Save" button, as shown in the following figure: Note: Administrators cannot be deleted. 3.5.1.5 Network 3.5.1.5.
G4 DVR-M1N-RPH User Manual The device can connect to multiple servers at the same time according to the configuration. By default, one server is connected. It supports adding or deleting servers manually. Servers whose information can be reported include the CEIBA2 server, maintenance server, FT platform, and customer platform. The network connected to the server supports the local network, WIFI network, and 3G/4G communication network.
G4 DVR-M1N-RPH User Manual x Center Server: By default, only Server 1 is available. More center servers can be added, no more than 6 in total. Tap to add new servers, and tap to delete servers. Server 1 cannot be deleted. ؍Note: Up to two servers added to each platform. x On: Tick the box to enable the server. If it is canceled, the device will not report the server information yet with server parameters reserved.
G4 DVR-M1N-RPH User Manual 3.5.1.5.2 Local Network The device MDVR can be connected to the local network through the IPC-to-network-interface cable. The device can be connected to the network through the local network and report information to the platform; or can be accessed remotely through IE by connecting the MDVR and the computer through the network screen and setting the corresponding IP.
G4 DVR-M1N-RPH User Manual x DHCP Mode: The DHCP Mode is used to automatically assign an IP to the device. If this mode is selected, no other settings are required as the device will connect to the network directly via the network cable. If it is connected successfully, IP Address, Subnet Mask, and Gateway of the device will be displayed below. x Static IP: Ticking the static IP requires the user to know the connectable IP network segment, and manually enter the IP Address, Subnet Mask and Gateway.
G4 DVR-M1N-RPH User Manual 2) If Static IP is selected, only DNS can be customized. 3.5.1.5.3 Port On the live view screen, tap Login Avatar > Setup > Basic Setup > Network > Port, as shown in the following figure: The default port number is 80. Users can change the number to another one, such as 81. It is mainly used for IE remote access. During access, the port number should be added after the IP address or the domain name. For instance: http://192.168.1.61:81.
G4 DVR-M1N-RPH User Manual x Enable WIFI: By default, it is Disable; if Client is selected, it is to enable WIFI. x ESSID: It should be entered manually, generally the WIFI name. x Encryption: The encryption methods include Wep, WPA/WPA2-PSK, and WPA2 _ Enterprise based on the connected WiFi. Among them, WPA/WPA2-PSK is the most commonly used one. x Password: Fill in the WIFI password.
G4 DVR-M1N-RPH User Manual For WIFI network, you can obtain the IP address automatically, and also can configure it with a static IP. 3.5.1.5.5 Comm Module The device supports and can be configured with two network communication modules (3G, 4G) to connect to the network and report information to the platform.
G4 DVR-M1N-RPH User Manual x Network Type: By default, it is the Mix mode, with 2G/3G/4G/Mix available for choices. x Dialing Parameters: includes APN, User Name, Password, Number, and Certification (None, PAP, CHAP, or Mix). Enter the parameters provided by the SMI card manufacturer. By default, it is null. If so, it will dial according to the program's parameters. x Active Mode: The network module can be activated by external conditions. The modes include Always, Telephone or SMS, and IO.
G4 DVR-M1N-RPH User Manual the established FTP service are configured, the device can connect to the FTP server to upload pictures or download files. On the live view screen, tap Login Avatar > Setup > Basic Setup > Application > FTP Server, as shown in the following figure: 3.5.1.6.2 Auto Download The Auto Download function is to be used in conjunction with the CEIBA2 platform. The auto download tasks can be created through CEIBA2.
G4 DVR-M1N-RPH User Manual as which cars to download, and under which network (4G, WIFI) to download. If you use WIFI network to download, you need to configure the WIFI-AP for each vehicle to download, and how many vehicles can be connected to each AP to download at the same time. Auto Download Reconnect, that is, when the vehicle returns to the station and cannot connect to the service, it will restart and try to download again after entering the sleep mode for a while.
G4 DVR-M1N-RPH User Manual 3.5.1.7.2 Algorithm The calibration height of ADAS lens can be set on this screen, and the unit can be centimeters or inches. When selecting centimeters as the unit, the optional range is 1to 400 cm, and the default is 153 cm. When selecting inches as the unit, the selectable range is 1 to 157 inches, and the default is 60 inches. On this screen, the switch of the AI alarm voice can be turned on or off.
G4 DVR-M1N-RPH User Manual AI alarm is generated, the MDVR will give a voice prompt. Tap Login Avatar > Setup > Basic Setup > Other Setup > Algorithm, as shown in the following figure: 3.5.1.7.3 Calibration On this screen, you can switch between the normal mode or calibration mode for each video channel.
G4 DVR-M1N-RPH User Manual x Mode Type: Normal mode or calibration mode can be selected. Select the calibration mode. After completing the calibration, be sure to switch back to the normal mode, otherwise, the alarm will not be triggered normally. 3.5.2 Surveillance On the Surveillance screen, you can set the preview image, video record, and IPC. 3.5.2.1 live view 3.5.2.1.
G4 DVR-M11N-RPH Userr Manual 1) Adjust the brightness, b contrast, chhroma and saturation s off each channnel video by y andd ; 2) Tap t flip the video to v left annd right, and d tap to flip the vvideo up and down; 3) After finishhing setting a channel, you can cop py the style to other chhannels. x Marrgins: Adjusst the margiin up, downn, left, and riight, as shown in the sccreen below w: x Starrtup Screen: The live view v preview w after the device d is staarted.
G4 DVR-M1N-RPH User Manual 3.5.2.1.2 Auto Loop Auto loop is to loop the videos of each video channel infinitely on the preview screen.
G4 DVR-M1N-RPH User Manual 1) Check the corresponding information enabling switch to display this OSD superimposition on the live view preview screen; 2) After the corresponding information is enabled, tap Setup button below to specify the position of each OSD superimposition. Note that the position of each OSD superimposition cannot go beyond the boundary. Tap Setup and the screen is as below. Drag the OSD superimposition to change their position: 3.5.2.2 Record 3.5.2.2.
G4 DVR-M1N-RPH User Manual On the live view screen, tap Login Avatar > Setup > Surveillance > Record > General, as shown in the following figure: x System The systems include PAL and NTSC, and the default is PAL. ؍Note: The setting must be consistent with the video source system. x Overwrite You can select from By Capacity, By Day, or Never.
G4 DVR-M1N-RPH User Manual ؍ Note: Locked recording can be overwritten and deleted only after the protection time is removed. x By Capacity is selected by default. In this case: 1) The SD card is overwritten by capacity. When the SD card storage space is less than 2 GB, overwriting starts, with files of 128 MB deleted each time. 2) Delete by channel number in sequence, and delete 250 M files of one channel at a time.
G4 DVR-M11N-RPH Userr Manual recording, the duration affter T3 is maarked as alaarm recordinng too. 2˅If thhere is no normal n recorrding, and the t pre-reco ording switcch is enabledd, the devicce will estaablish a pree-recording stream segm ment upon startup. s Wheen an alarm m is triggered d at T3, the recording geneerated between T2 and T3 in the pre-recordin p ng stream seegment is marked as alarrm recordinng.
G4 DVR-M1N-RPH User Manual x Channel: The channel number can be selected here. After selection, the recording and audio parameters of this channel can be set. You can customize the channel name below. x Channel Name: The channel name is customizable. x Enable: Main stream recording will be enabled after this option is selected. x Resolution: If connecting it to an analog camera, you can choose CIF/WCIF/HD1/WHD1/D1/WD. If connecting it to a digital camera, you can choose 720P or 1080P.
G4 DVR-M11N-RPH Userr Manual ؍Note: Each channnel can be individuallyy set up for the record mode. m b sub-strream and miirror record ding. Onnce the recoord mode is selected, it applies to both 1) Poower Up: Iff there is a disk/SD d carrd and recorrding is enabbled, the device will keeep reecording upon startup under u this mode. m 2) Alarm: A The device d startss recording when an alarm is trigggered. For ddetails aboutt how to set allarm recordding, see Secction 3.5.4.
G4 DVR-M1N-RPH User Manual default. x ؍ Audio Parameters Note: Separate audio recording is not supported.
G4 DVR-M1N-RPH User Manual x Audio: Whether to record audio during video recording. You can select Always Audio or No Audio. 1) Always Audio: The video is always recorded with audio. 2) No Audio: The video is recorded without audio. 3) Alarm Audio: The video is recorded with audio only in the alarm state. x Audio Coding Format: You can choose G711A, G711U, or ADPCM, and it's ADPCM by default. 3.5.2.2.3 Sub-stream Settings The function is to set sub-stream.
G4 DVR-M1N-RPH User Manual x Selection of channel: The channel number is optional. You can set the recording and audio recording parameters after the selection. You can customize the channel name below. x Enable recording: Enable the sub-stream recording function after the click. x Coding standard: H264 and H265 optional x Audio recording: It indicates whether to record audio while recording. Audio recording, no audio recording and alarm audio recording are optional.
G4 DVR-M1N-RPH User Manual 3.5.2.3 IPC Setup After the MDVR is connected to the IPC camera, you can search for and set the IPC here. On the live view screen, tap Login Avatar > Setup > Surveillance > IPC Setup, as shown in the following figure: z Supports IPC plug-and-play automatic configuration, IPC quick setup, and manual configuration of IPC channels by searching for IP. z Supports IPC quick setup.
G4 DVR-M1N-RPH User Manual z After the IPC channel is enabled, the corresponding analog channel is automatically invalid. z Each channel supports the IPC search function, and can display the searched IPC list information. The modified IP address to IPC from the search result is to modify the IPC, and the modified IP address in the editing is to select the IPC for the channel. z Supports the local address configuration of the IPC network segment.
G4 DVR-M11N-RPH Userr Manual 3.5.3 Colllection 3.5.3.11 General 3.5.3.11.1 Sensor The G4 G DVR-M11N-RPH MD DVR suppoorts eight sen nsor input signals. s Thee serial port lines shown in thhe followingg figure are labeled as SENSOR IN N1 to SENS SOR IN8: This function fu cann customize the name, abbreviation a n, trigger siggnal source, and purpo ose of the sensor.
G4 DVR-M1N-RPH User Manual x Sensor Number: You can choose the sensor from 1 to 8, sensor 1 corresponds to the line labeled SENSOR IN1 above. x Sensor Name: The name of the corresponding sensor, which can be set manually. After the setup, the sensor name on the alarm setup screen will be updated synchronously. x OSD Name: The abbreviation of the name will be displayed when the alarm information is superimposed on the OSD. x Trigger Source: Level and pulse.
G4 DVR-M1N-RPH User Manual x Sensor Uses: Select the use of the sensor according to the actual scene. x Copy To: Copy the parameter of a certain sensor to one or all other sensors. 3.5.3.1.2 Serial Port G4 DVR-M1N-RPH supports the 2-channel RS232and1-channel RS485. This function can set the function and Baud rate of the serial port.
G4 DVR-M1N-RPH User Manual x Unit: KM/H or mph. x Source: There are three sources available: Satellite, Pulse, or OBD. When pulse is selected as the speed source, the setup screen is as follows: The pulse speed calibration function is to obtain the value of the pulse coefficient. The pulse coefficient is the number of pulses generated per kilometer of the vehicle.
G4 DVR-M1N-RPH User Manual display the calculation result. (the calculation result unit is consistent with the speed unit) 5˅The status of Start Training will be automatically saved, and this status will not be cleared even if the device is powered off and restarted. 3.5.3.1.4 Location GPS module is required to use the location function. The integrated location chip of the module supports the four major satellite navigation systems of Beidou, GPS, Galileo, and Glonass.
G4 DVR-M1N-RPH User Manual ؍ Note: The speed source of the mileage value is the same as the speed source selected by the vehicle speed, and no special source is required to set here. x Total: Here you can view the current total mileage of the vehicle. x Base Value: You can set a current base value for calibration. x Operation: Correct will change the current total mileage to the entered base mileage; Clear will clear the current mileage. 3.5.3.1.
G4 DVR-M1N-RPH User Manual 3.5.3.2 Advanced The function can set the device network name, type, IP address and port. Click ǏLogin profileǐ> ǏSetupǐ>ǏCollectionǐ>ǏAdvancedǐ on the preview screen and the screen is shown as follows: 3.5.3.3 Snap Setting The device can trigger the snap function under certain conditions and can automatically upload it to the server. Here you can set the snap conditions and the snap linkage. On the live view screen, tap Login Avatar > Setup > Collection > Snap Setting.
G4 DVR-M1N-RPH User Manual 3.5.3.3.1 Time Snap You can set the time period during which the device will automatically take snap pictures at regular intervals.
G4 DVR-M1N-RPH User Manual 1) Set a time period and enable the snap function during this time period. 2) The time period of time snap is within one day. 3) It supports up to 8 time periods of time snap every day. 4) You can add, delete, and edit time periods. x Independent snap parameters can be set for each time period, tap Operate to enter the snap link screen: 1) Channel: Select the camera channel to snap. 2) Enable: Check to enable the time snap function of this channel.
G4 DVR-M1N-RPH User Manual Tap Setup to enter the alarm snap link screen. Its setup is the same as the time snap. 3.5.3.3.3 Manual Snap Connect an external button via IO or serial port, or a button on CP4 of the device. After triggering, a snapshot can be executed, and the snap method is executed according to the parameter configuration. For the parameter configuration, please refer to Section 3.5.3.1 on sensor and serial port.
G4 DVR-M1N-RPH User Manual linkage. However, the manual snap does not have the Interval setup, it will take a snap picture once triggered. 3.5.4 Alarm Setting On the live view screen, tap Login Avatar > Setup > Alarm to enter the following alarm setup screens.
G4 DVR-M1N-RPH User Manual 3.5.4.1 Base Alarm 3.5.4.1.1 IO Alarm The MDVR can be connected to eight IO input signals. The IO alarm can be customized to set the name and alarm type, where you can set the triggering conditions and linkage setup of the alarm. Tap IO Alarm on the base alarm screen, and the screen is shown as below: x Enable: Whether to enable the IO alarm function, check it to enable. x Alarm Type: Alarm and Event.
G4 DVR-M1N-RPH User Manual 1) Trigger: You can choose High or Low level, and it is High by default. 2) Effective Time: a time period during which a cleared alarm is triggered again. Alarms triggered in this period are considered the same. For example: A motion detection alarm is triggered at 13:23:30 and cleared at 13:23:50.
G4 DVR-M1N-RPH User Manual 3) Lock: You can set whether to lock the alarm recording. If checked, after the speeding alarm is triggered, the started alarm recording will be locked. The recording lock will end after the alarm is cleared. 4) Linkage IO Output: After the speeding alarm is triggered, IO output 1 and 2 have high level output. 10 seconds after the alarm is cleared, IO output 1 and 2 return to low level.
G4 DVR-M1N-RPH User Manual x Enable: Whether to enable the speeding alarm function, check it to enable. Only by checking enable can you set the trigger condition and linkage. x Alarm Type: Alarm and Event. x Trigger: Tap Setup to enter the following screen: 1) The combination of Speed and Duration is used to trigger the speed alarm, that is, when the speed exceeds the set speed for a certain period of time, it is considered as a speeding alarm.
G4 DVR-M1N-RPH User Manual x Linkage: The services that can be linked when an alarm occurs. The specific setup is the same as the IO alarm. 3.5.4.1.3 Urgent Alarm The urgent alarm is the alarm triggered by the driver pressing the emergency button in a dangerous situation. The signal input of the emergency button is generally accessed through the 485 protocol transmission port. In Section 3.5.3.1.2, the 485 port can be configured for control urgent alarms.
G4 DVR-M1N-RPH User Manual 1) Any Key: Set the duration of the key-press for emergency alarm. 2) Effective Time: a time period during which a cleared alarm is triggered again. Alarms triggered in this period are considered the same. The detailed description is the same as those of the IO alarm. x Linkage: Tap Setup. The screens and details are the same as those of the IO Alarm. 3.5.4.2 Video Alarm 3.5.4.2.
G4 DVR-M1N-RPH User Manual x Enable: Whether to enable the video loss alarm function, check it to enable. Only by checking enable can you set the trigger condition and linkage content. x Alarm Type: Alarm and Event. The detailed description of the difference between alarm types is the same as those of the IO alarm. x Trigger: Tap Setup to enter the following screen: 1) Channel: An alarm will be triggered once the videos of checked channels are lost.
G4 DVR-M1N-RPH User Manual 3.5.4.2.2 Motion Motion detection alarm means that an alarm will be triggered when a moving target appears within a certain area. The premise that the motion detection alarm can be set is that the corresponding channel has a video monitoring screen. Here you can set specific functions such as the corresponding alarm trigger conditions and linkage content.
G4 DVR-M1N-RPH User Manual 2) Sensitivity: ranges from 1 to 8. The smaller the sensitivity value, the higher the sensitivity. Because the sensitivity is affected by the color time (day or night), etc., the value needs to be adjusted according to the actual situation. 3) Area: Tap Setup, and drag the motion detection area on the channel image. You can set multiple motion detection areas. ؍ Note: The default is to select all. The motion detection areas are in green, and the non-detection area in gray.
G4 DVR-M1N-RPH User Manual below: x Enable: Whether to enable the cover alarm function, check it to enable. x Alarm Type: Alarm and Event. The detailed description of the difference between alarm types is the same as those of the IO alarm. x Trigger: Tap Setup to enter the following screen: 1) Channel: An alarm will be triggered once the checked channels are detected to be covered. 2) Sensitivity: You can choose Low, Medium, or High.
G4 DVR-M1N-RPH User Manual triggered in this period are considered the same. The detailed description is the same as those of the IO alarm. x Linkage: Tap Setup. The screens and details are the same as those of the IO Alarm. 3.5.4.3 Advanced Alarm 3.5.4.3.1 ACC Alarm The ACC Alarm is triggered based on the change of position and impact force detected by the built-in G-sensor of the MDVR.
G4 DVR-M11N-RPH Userr Manual If the accceleration in the direcction is greaater than thiss value, an aalarm will be b triggereed; 2) Effectivve Time: a time t period during which a clearedd alarm is trriggered agaain. Alarms triggereed in this peeriod are connsidered thee same. ACCEL2 Mode: M x A Alarm Type: Alarm and Event. x C Calibrate: Taap Calibratee, and the vaalue of each h coordinatee axis will reeturn to zero o. x Innstallation Angle: A incluudes roll anggle, pitch an ngle, and yaaw angle.
G4 DVR-M11N-RPH Userr Manual 1) Offset is i the acceleeration from m the resultaant force in a certain axxis direction n.
G4 DVR-M1N-RPH User Manual In this screen, you can only enable or disable the Geo-fence alarm and voice broadcast, and cannot set the location and range of the Geo-fence. The area and line of the Geo-fence can be set on the CEIBA platform. 3.5.4.3.3 T&H Sensor At present, 4 T&H sensors are supported. The alarm will be triggered when the temperature of a sensor reaches the set value.
G4 DVR-M1N-RPH User Manual 1) High Temp. Thresh: The alarm will be triggered when the temperature exceeds the set value; 2) Temp. Increase Warn Time & Temp. Increase Difference: Assume that when the time is set to 5 minutes and the temperature difference is set to 20 degrees, if the temperature rises by 20 degrees within 5 minutes, an early warning will be triggered. Early warning will be recorded in the log. 3) Effective Time: a time period during which a cleared alarm is triggered again.
G4 DVR-M1N-RPH User Manual 3.5.4.4.1 DMS Alarm The Driver Monitor System (DMS) is for monitoring driver's behaviors. Connect to the DMS cameras to enable the alarm functions. The settings for DSM alarm are as follows: ¾ Fatigue Driving: alarm for closing eyes and fatigue of a driver x Enable: You can check the box to enable the alarm function. x Alarm Type: Alarm and Event. The detailed description of the difference between alarm types is the same as those of the IO alarm.
G4 DVR-M1N-RPH User Manual alarm is triggered, there are both "beep" sounds and voice prompts. 2) Secondary Speed Range: The lower limit of this range varies with the upper limit of the level-1 alarm speed range.
G4 DVR-M1N-RPH User Manual ¾ Phone Call: alarm for making phone calls x Enable: You can check the box to enable the alarm function. x Alarm Type: Alarm and Event. The detailed description of the difference between alarm types is the same as those of the IO alarm. x Trigger: Tap Setup to enter the following screen: 1) Level Speed Range: Level-1 alarm for speed range: The alarm will be triggered by the driver's behavior only when the vehicle speed is within the set range.
G4 DVR-M1N-RPH User Manual x Enable: You can check the box to enable the alarm function. x Alarm Type: Alarm and Event. The detailed description of the difference between alarm types is the same as those of the IO alarm. x Trigger: Tap Setup to enter the following screen: 1) Level Speed Range: Level-1 alarm for speed range: The alarm will be triggered by the driver's behavior only when the vehicle speed is within the set range.
G4 DVR-M1N-RPH User Manual x Trigger: Tap Setup to enter the following screen: 1) Level Speed Range: Level-1 alarm for speed range: The alarm will be triggered by the driver's behavior only when the vehicle speed is within the set range. When the level-1 alarm is triggered, there are both "beep" sounds and voice prompts; 2) Secondary Speed Range: The lower limit of this range varies with the upper limit of the level-1 alarm speed range.
G4 DVR-M1N-RPH User Manual 1) Level Speed Range: Level-1 alarm for speed range: The alarm will be triggered by the driver's behavior only when the vehicle speed is within the set range. When the level-1 alarm is triggered, there are both "beep" sounds and voice prompts; 2) Secondary Speed Range: The lower limit of this range varies with the upper limit of the level-1 alarm speed range.
G4 DVR-M1N-RPH User Manual ¾ LDW: Lane Departure Warning x Enable: You can check the box to enable the alarm function. x Alarm Type: Alarm and Event. The detailed description of the difference between alarm types is the same as those of the IO alarm. x Trigger: Tap Setup to enter the following screen: 1) Level Speed Range: Level-1 alarm for speed range: The alarm will be triggered by the driver's behavior only when the vehicle speed is within the set range.
G4 DVR-M1N-RPH User Manual x Enable: You can check the box to enable the alarm function. x Alarm Type: Alarm and Event. The detailed description of the difference between alarm types is the same as those of the IO alarm. x Trigger: Tap Setup to enter the following screen: 1) Level Speed Range: Level-1 alarm for speed range: The alarm will be triggered by the driver's behavior only when the vehicle speed is within the set range.
G4 DVR-M1N-RPH User Manual 1) Level Speed Range: Level-1 alarm for speed range: The alarm will be triggered by the driver's behavior only when the vehicle speed is within the set range. When the level-1 alarm is triggered, there are both "beep" sounds and voice prompts; 2) Secondary Speed Range: The lower limit of this range varies with the upper limit of the level-1 alarm speed range.
G4 DVR-M1N-RPH User Manual 1) Level Speed Range: Level-1 alarm for speed range: The alarm will be triggered by the driver's behavior only when the vehicle speed is within the set range. When the level-1 alarm is triggered, there are both "beep" sounds and voice prompts; 2) Secondary Speed Range: The lower limit of this range varies with the upper limit of the level-1 alarm speed range.
G4 DVR-M11N-RPH Userr Manual B Right Blind Spot Detection ¾ Right BSD: x E Enable: Youu can checkk the box to enable the alarm functtion. x A Alarm Typee: Alarm or Event x Trigger: Tapp to enter thhe followingg screen 1)) Level Speed Range: The alarm will be triggered by thhe driver's beehavior only y when the vehicle sppeed is withhin the set range. r The speed s limit is i 0-255 km m/h.
G4 DVR-M1N-RPH User Manual x Linkage: Tap Setup. The screens and details are the same as those of the IO Alarm. Note: The settings of the Left BSD alarm are the same as the above and are not described here. 3.5.5 Maintenance Settings On the Config screen under Maintenance, you can import and export parameter config files, upgrade devices, view storage, and reset or restart the device.
G4 DVR-M1N-RPH User Manual 3.5.5.1 Config File You can import and export config parameters with a USB flash drive. When there are only parameters to be imported, you need to create a folder named "ConfigFile" under the root directory of the USB flash drive and place the parameter file in the folder. ¾ Device Parameters Device parameters are a series of settings for the MDVR. If you export the parameters and then import them to another device, the setting parameters will be copied to the device.
G4 DVR-M1N-RPH User Manual be exported). Connect the USB flash drive containing the config file to another device, select "Import", and the device will prompt that the parameter import is successful. Parameters in the config file contained in the USB flash drive will be imported into the device (registration information such as license plate number will not be imported). The import and export processes of DMS device parameter files are the same as those of MDVR and are not described here. 3.5.5.
G4 DVR-M1N-RPH User Manual Export Time: You can export the data of all the time periods, or export the data of part of the time periods. File Type: You can select Captured Picture/Alarm Log/Operation Log/Black Box File/DEBUG File. Connect the device to a USB flash drive and tap Export. If there are relevant files, the "Export succeeded." message will be displayed; if there is no corresponding file, the "No file." message will be displayed.
G4 DVR-M1N-RPH User Manual 3.5.5.2.2 File Operation The File Opt screen is for importing and exporting the Geo-fence file in the device. x Geo-fence file Export: Export the file from the device to the root directory of a USB flash drive. The file name is area.json. The location of the file is shown in the following figure: Import: Place the Geo-fence file in the root directory of a USB flash drive and tap Import to import the file. (It can also be issued remotely via the CEIBA platform.
G4 DVR-M1N-RPH User Manual Create a folder named "upgrade" under the root directory of a USB flash drive, place the upgrade file in the folder, plug the USB flash drive into the USB port on the front panel of the MDVR, and tap the corresponding upgrade button. When upgrading MDVR software, the device will restart automatically and enter the upgrade screen. When the upgrade is done, the device will restart automatically and start normally. The MDVR will not restart when other software is upgraded.
G4 DVR-M1N-RPH User Manual place multiple upgrade files at one time, otherwise, one upgrade file will be randomly selected for the upgrade. 3.5.5.4 Storage Storage includes SD card (built-in), fireproof box (displayed as SD card (external)), and USB flash drive. SD card is for video storage, and USB flash drive is for importing and exporting parameter files. On the live view screen, tap Login Avatar > Setup > Maintenance > Storage to enter the module.
G4 DVR-M1N-RPH User Manual x Storage Type: Four types: hard disk, SD card (built-in), SD card (external), and USB flash drive. G4 DVR-M1N-RPH cannot be connected to a hard disk. x Free/Total: 1) The memory works well if the device is displaying the correct memory information; 2) Not Exist: The hard disk is not found (not installed or damaged); 3) Unformatted: The hard disk is found, but the local formatting (new hard disk) is required. x Format or Not: 1) Tap Format to start formatting.
G4 DVR-M1N-RPH User Manual ¾ Default All Settings Default All Settings can restore all parameters to the default factory settings. Tap the Reset button to restore the default setting parameters. ¾ System Reboot Tap the Reboot button to restart the system.
G4 DVR-M1N-RPH User Manual 3.6 Logout Tap the button on the upper right corner of the Setup screen, Record Search screen, or the Log Search screen to return to the main setting screen, as shown in the following figure: Tap the Logout button and tap "Yes" in the prompt box to log out and return to the live view screen.
G4 DVR-M1N-RPH User Manual Caution: 1.Max operation temperature: 40 degree C. Min operation temperature: -10 degree C. 2.This product can be used in UK. This device can be used in UK 3.Products can be sold in UK Declaration of conformity Trimble Transportation declares that Micro system with G4 DVR is in compliance with the essential requirements and other relevant provisions of Directive SI 2017/1206. 4. This product can be used in EU member states. This device can be used in European Union. 5.
G4 DVR-M1N-RPH User Manual ISED Canada Statement: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada 's licence exempt RSS(s). Operation is subject to the following two conditions: 1) This device may not cause interference and 2) This device must accept any interference, including interference that may cause undesired operation of the device.
G4 DVR-M1N-RPH User Manual If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.