FCC ID:2AS6EIP-BS-US IP-BS-US Setting Manual Copyright ⓒ 2018 People & Technology Co., Ltd.
Contents 1. Introduction ---------------------------------------- 3 2. IP-BS-US -------------------------------------------- 4 3. Hardware Specification ---------------------------- 5 4. Scanner Install Location ---------------------------- 6 5. Scanner Installation --------------------------------- 7 6. How to set up the scanner ------------------------- 8 7. FAQ -------------------------------------------------- 15 8.
Introduction ። Purpose This document provides basic guidelines for customers who use products designed by People & Technology. ። Range The scope of this document is to provide software descriptions and general instructions from IP-BS-US. ። Object This document is intended for customers using People & Technology's IP-BS - US. ። Question Please contact http://www.pntbiz.co.kr for technical support and documentation errors. 3 Copyright ⓒ 2018 People & Technology Co., Ltd.
IP-BS-US 2) Antenna 1) Scanner Body ። Component Description 1) IP-BS-US Scanner Body 2) Antenna * If the component is missing or damaged, contact your place of purchase. Please keep the boxes and packaging materials in case of return. 4 Copyright ⓒ 2018 People & Technology Co., Ltd.
Hardware Specification Features Description CPU TI CC3200 ARM® Cortex® -M4 Core at 80 MHz Memory RAM (Up to 256KB) Storage External S-Flash Network 802.11 b/g/n BLE Scanner + Peripheral (nRF52832 x 2) Antenna BLE x2 / Wi-Fi x1 Power USB Port (With USB to UART) 5 Copyright ⓒ 2018 People & Technology Co., Ltd.
Scanner Install Location This scanner can be connected to the network anywhere within the range of the wireless network. However, the operating distance of the scanner, the range of wireless connections, may vary significantly depending on the physical arrangement of the scanner. For example, the thickness and number of walls that a wireless signal passes through can limit the scope of the scanner. - It is recommended to be near the WiFi router. Stay away from potentially interfering devices.
Scanner Installation ። Scanner Installation 1. Connect the scanner to the USB DC adapter. 2. Check the LEDs on the scanner. ። LED Scenario 1. Powered On 2. 3. 4. PWR BT Wi-Fi PWR BT Wi-Fi PWR BT Wi-Fi PWR BT Wi-Fi WiFi (AP) Connected BT Signal Received Data Transmitted Blinking 7 Copyright ⓒ 2018 People & Technology Co., Ltd.
How to set up the Scanner 1. Run the settings app provided. After launching the app, click the button in the lower right corner to search for the scanner. 2. Select the scanner you want to set from the list. 8 Copyright ⓒ 2018 People & Technology Co., Ltd.
How to set up the Scanner 3. Enter the PIN number you received. (It can only be connected within 30 seconds of power on.) 4. Enter PIN number and the screen for setting up the scanner will be displayed. 9 Copyright ⓒ 2018 People & Technology Co., Ltd.
How to set up the Scanner 5. Click the “SCAN SSID" button. 6. Click the "SEARCH" button in the top right corner to start WiFi scanning. 10 Copyright ⓒ 2018 People & Technology Co., Ltd.
How to set up the Scanner 7. Select the WiFi you want to connect to from the list. *5GHz band is not supported 8. Check the selected WiFi SSID. 11 Copyright ⓒ 2018 People & Technology Co., Ltd.
How to set up the Scanner 9. Enter your WiFi password. 10. Check the scanner ID. 12 Copyright ⓒ 2018 People & Technology Co., Ltd.
How to set up the Scanner 11. Enter the server information to which the scanner will send data. (Default value is WMS server information) 12. The scanner becomes a beacon and can send a beacon signal. 13 Copyright ⓒ 2018 People & Technology Co., Ltd.
How to set up the Scanner 13. Change to ON to set UUID, Major, Minor, Tx Power, Interval, and so on. (USB Beacon information can also be changed by WMS) 14. When the setting is complete, click the " Save " button to finish the setup. 14 Copyright ⓒ 2018 People & Technology Co., Ltd.
FAQ Q1. If you USB Scanner not found. A1. Turn off the scanner, power it back up, and try connecting It. can only be connected within 30 seconds of power on. Q2. If you unable to connect to WiFi SSID. A2. Please check your WiFi information and router settings. Q3. If you forgot ID and password. A3. Please contact the place of purchase or head office. Q4. If you want to buy an antenna. A4. Please contact the place of purchase or head office. If you have any questions, please contact http://www.pntbiz.
Special Note * Bonding of scanner body and antenna When IP-BS-US is purchased by customers, the scanner body and the antenna of IP-BS-US is to be bonded firmly and then delivered to the customer to avoid separation of body and antenna. * Separation of antenna is restricted for proper working We are NOT GAURANTEE of proper working of IP-BS-US in such a case when customer separates antenna of IP-BSUS from its body at any reason. 16 Copyright ⓒ 2018 People & Technology Co., Ltd.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
www.pntbiz.com Copyright ⓒ 2018 People & Technology Co., Ltd.
