PWCX001 USER’S GUIDE Wireless Charging Dock
WARNING TO PREVENT FIRE OF SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The Caution Marking is located at the back enclosure of the apparatus. The Rating plate is located at the back enclosure of the apparatus IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions.
15. Do not overload wall outlet. Use only power source as indicated. 16. Use replacement part as specified by the manufacturer. 17. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks. 18. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
COMPLIANCE WITH FCC REGULATIONS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
CONTENTS CONTROL LOCATION GENERAL OPERATION SPECIFICATIONS . 4 .. 5 .5 CONTROL LOCATION 1. LED indicator 2. Show the unit working status Wireless charger Coil plate Put the mobile on it for wireless charging 3. DC IN jack Connect the adapter DC output jack.
GENERAL OPERATIONS Instruction for Use PB-03 supports quick charge function. Short range radio transmission is achieved by using magnetic induction. It provides wireless charging function for all the PB-03. Setup: 1 Plug USB Type C into the port at the back of the BP-03 unit. 2. Connect the other end of USB with the charger and plug it to the power supply The indicator light turn on in Green color which indicate the unit is working. 3.
