PENGO 4K HDMI Grabber - OBS Setting Quick Guide (V23.0.1 64bit)- Windows Disclaimer: The display of the OBS settings might be different depending on the OS of your device and the version of the OBS software. Video Setting: 1.
. Under Create/Select Source: Rename the source and click OK 3.
4. Parameter Setting references are displayed as below *Resolution/FPS Type: Custom *Resolution :1920x1080 (whichever is supported by your monitor/display) *FPS: Highest FPS *Video Format: YUY2 (make sure you are under USB 3.0, if you are not under USB3.
Audio Setting 1. Click on the audio setting icon as displayed below 2.
3. Under Properties: Select “PENGO HDMI Grabber” as your device 4.
5. Under Advanced Audio Properties: Select “Monitor and Output” in all settings 6.
PENGO 4K HDMI Grabber - - - OBS Setting Quick Guide -MacOS Disclaimer: The display of the OBS settings might be different depending on the OS of your device and the version of the OBS software. Video Setting: 1.
2. Rename the Input Source and click OK 3.
*Do not click “Use Preset” *Resolution: select the best resolution possible 1920 x 1080 *FPS: Simple FPS Values 60 *Input Format: YUY2 (make sure you are under USB 3.0, if you are not under USB3.
Audio Setting: 1. Click on the Audio Setting Icon as indicated below 2.
3. Select “PENGO HDMI Grabber” in Device 4. Click on the Audio Setting Icon and select “Advanced Audio Properties” 5. Under Advanced Audio Properties: Select “Monitor and Output” 6.