4K HDMI GRABBER HDMI to USB 3.0 Video Capture Box User manual (v.
A. Introduction ---------------------------------------------------------------------------------- 03 B. Features --------------------------------------------------------------------------------------- 03 C. Inside the box -------------------------------------------------------------------------------- 03 D. Specifications -------------------------------------------------------------------------------- 04 E.
A. Introduction The Pengo 4K HDMI Grabber is designed to support a 4K UHD Video output and capture audio/video HDMI Source. Transferring audio/video between the grabber and your PC/NB via USB easily enables streamers to capture each sound and movement. Using the Pengo 4K HDMI Grabber will allow a stable video capture in 1920 x 1080p at 60 fps without affecting the performance of your computer. B. Features Supports HDMI 2.0 4K @ 60 fps 4:4:4 input Supports HDMI 2.0 Pass-through output USB 3.
D. Specifications DESCRIPTION 4K UHD HDMI to USB 3.0 Video Grabber INPUT INTERFACE 1 x HDMI type A 2.0 INPUT RESOLUTION 640 x 480p, 60Hz 1280 x 720p, 30Hz, 50Hz, 60Hz 1920 x 1080p, 24Hz, 25Hz, 30Hz, 50Hz, 60Hz 3840 x 2160p, 24Hz, 25Hz, 30Hz, 50Hz, 60Hz HDMI VIDEO SAMPLING 4:4:4 format 1 x 3.5mm audio input 1 x HDMI type A, loop-through output OUTPUT INTERFACE 1 x USB Type A (USB 3.0, USB 2.0), supporting UVC video and audio 1 x 3.
F. Installation 1. 2. 3. 4. G. Connect Pengo 4K HDMI Grabber into the computer USB 3.0 Port using the USB 3.0 cable inside the package. Plug in your devices (ie: PS4 Pro, Xbox One X) with an HDMI Cable into the HDMI input port. Plug in your display device (ie: monitor) with a HDMI Cable into Pengo 4K HDMI Grabber LOOP out port. Plug in your 3.5mm headphones and microphone into their perspective ports. Operating Instructions (Windows with PotPlayer) 1. PotPlayer 1.
1.2 Download PotPlayer : https://potplayer.daum.net/ (install base on your OS version) 1.3 Open PotPlayer (different versions will have different interface) 1.
1.5 Select Device I. II. Under Menu > Open -> Device Settings Under Webcam -> Video capture device, under Device select -> [ Pengo HDMI Grabber] III. Audio capture device -> under Device select -> [ WASAPI – Mic (Pengo HDMI Grabber) ] IV. Press [ Open device], You’ll be able to see your video and audio 1.6 Video Recording I. Go to the Menu -> Video -> Video Recording -> Record Video II. Select your storage location III.
H. Operating Instructions (Mac OS with VLC or QuickTime) **Newer version of VLC might not work 1. VLC 1.1 Download VLC at https://www.videolan.org/index.html 1.2 Open VLC 1.3 Go to File -> Open Capture Device 1.4 Under Capture, check the video and audio box and select [Pengo HDMI Grabber] and press Open 2. QuickTime 2.1 Open QuickTime 2.2 Go to File -> New Movie Recording 2.
Note: • • • • It is recommended to use our USB 3.0 cable. Different version will have slightly different interface. Make sure your source does not have HDCP, we do not support HDCP. Make sure your device is not 1080i. We do not support 1080i. We support 1080p. • • • Please contact us if you have any issues. We reserve the right to make any updates without prior notice. Please register your Pengo product at: www.pengohome.