User Manual

All About The PenPad

We're insanely grateful that you got PenPad, thank you very much for your

support in helping us bringing a feeling and experience to digital art on the iPad.

This welcome page it to help you get setup if our instructions didn't already help

get you there. Let's get straight to it.

Getting started

On the back of the device, you'll find an "on/off" switch. Switch it to on. Go to to

your bluetooth settings and tap PenPad. Don't see it there? Press and hold the

"Pen.Tips + Settings" button on PenPad to put PenPad into pairing mode again.

We deliver PenPad's pre-charged, but it could be that the charge has depleted

during shipment. If PenPad does not show any light indication, you made need to

charge your device for 30 minutes before use. Otherwise, you can head straight

to Procreate.

Functions

We've stored over 20 functions for you on PenPad, and even some Easter eggs.

If you'd like to increase or decrease your brush size by 1%, then press and hold

"Pen.Tips + decrease/increase brush size". However, this may not work yet with

every device, this is a known bug in Procreate's software that we're working

together on to resolve.

Looking for the smudge tool? Press the "Actions Popover" button, tap "Prefs"

before heading into "Gesture Controls". Where it says "Smudge" you can opt for

different options as to how your iPad will respond to smudge. The square you

see there, can be found under the Eyedropper button on PenPad. Now its up to

you to decide what works best in your workflow!

PAGE 1
All About The PenPad We're insanely grateful that you got PenPad, thank you very much for your support in helping us bringing a feeling and experience to digital art on the iPad. This welcome page it to help you get setup if our instructions didn't already help get you there. Let's get straight to it. Getting started On the back of the device, you'll find an "on/off" switch. Switch it to on. Go to to your bluetooth settings and tap PenPad. Don't see it there? Press and hold the "Pen.
PAGE 2
Light indicators There are 3 indicators on the top of your device. From left to right, you'll see the power on/off light, Bluetooth light and charging light. When you turn the device on, the first light will turn green. Depending on if your device has previously been paired, then the Bluetooth button will switch on momentarily. If you press and hold "Pen.Tips + settings" for 5 seconds, the Bluetooth light will start blinking. This indicates that it is in pairing mode.
PAGE 3
light will turn off again. If you leave it PenPad charging too long, the light will start blinking. How do I charge PenPad? In the box, you'll find a micro-USB or USB-C cable (depending on your version). A maximum of 20-watt charger is advised. Common challenges and solutions Our PenPad will only work under the American English input method on iPad. On the bottom left of your keyboard on iPad, you can see a globe button. Hold this button before switching it to English (US).