www.amazon.com/shops/PEMENOL sameiyi@163.
www.amazon.com/shops/PEMENOL sameiyi@163.
www.amazon.com/shops/PEMENOL sameiyi@163.com Brief Intro: ZK-DP3A is a 15W DC adjustable constant voltage/constant current step up/down power supply module with LED digital tube display. It supports fast charging for QC2.0, QC3.0, AFC, FCP, SCP fast charge protocol. Displaying output voltage, output current and output power. Adjustable output voltage and current. Setting output current to meet the require. It can be used as ordinary buck power supply module, charger and LED constant current driver.
sameiyi@163.com www.amazon.com/shops/PEMENOL Display Input voltage, Output voltage/current/power/capacity statistics. Parameters: 1 Input Voltage for Pads DC 4.0V-13.0V 2 Input Voltage for USB DC 5.0V 3 Output Voltage DC 1V-30.0V 4 Output Current 2A 5 Output Power 15W(Max) 6 Current Display Range 0~2.2A 7 Working current 30mA 8 Short Circuit Protection √ 9 Anti-backflow Protection √ 10 Over-Voltage Protection √ 11 Over-Power Protection √ 12 Size 100.5*40*19.
www.amazon.com/shops/PEMENOL sameiyi@163.com mode, or trigger charge deception function at fast charge protocol selection mode; Long press is used to set default ON or OFF for next re-power at display mode. SW Button: Short press to switch display output voltage and output current; or trigger charge deception function at fast charge protocol selection mode. Long press is used to switch display output current, output power and capacity statistics.
www.amazon.com/shops/PEMENOL sameiyi@163.com Fast Charge Deception Function: Support intelligent fast charge deception function to solve the problem of insufficient power supply of USB input port. Support mainstream fast charging protocol: QC2.0, QC3.0, AFC, FCP, SCP. User can choose not to deception or automatically choose the deception mode. Keep pressing button TRIG for 2 seconds, entering into fast charging protocol selection interface, Screen will display fast charging protocol.
www.amazon.com/shops/PEMENOL 3) 4) 5) 6) 7) sameiyi@163.com needs. Rotate CV potentiometer counterclockwise more than 10 turns if the output voltage can not be adjusted. Rotate CC potentiometer counterclockwise more than 10 turns at first. Short circuit between OUT+ and OUT-(Connect both by wire). Or test Output short circuit current by multimeter at 10A or 20A (Connect two Test Probes to output terminal on module). Or Short circuit output terminal directly.
www.amazon.com/shops/PEMENOL sameiyi@163.com 1) Make sure LED working current and maximum working voltage. 2) Connect right input voltage at input terminal. (Note:Please don’t connect load during setting parameter). 3) Short circuit between OUT+ and OUT-(Connect both by wire). Or test output voltage by multimeter at output terminal and adjust CV potentiometer to set output voltage to LED’s maximum working voltage. 4) Rotate CC potentiometer counterclockwise more than 10 turns.
www.amazon.com/shops/PEMENOL sameiyi@163.com After-Sales: *We have always been keen to provide customers with the best quality service at the most competitive price. *Looking forward to get progress and growth with all of you. *For more product questions and inquiries, please send your advice to sameiyi@163.
