en sp USER MANUAL Electric Oil-Filled Radiator Heater HO-0279 Rated voltage: 120V Rated power: 600 ~ 1500W Frequency: 60Hz Warning Notice: Before using this product, please read this manual carefully and keep it for future reference. For additional support, please call customer service at 1-866-646-4332. The design and specifications are subject to change without prior notice for product improvement. Consult with your dealer or the manufacturer for details. HO-0279 version A - 09 - 2021 midea.
IMPORTANT INSTRUCTIONS PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read all instructions before using this heater. 2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater.
UNPACKING AND SET-UP INSTRUCTIONS Unpack your heater and find the wheel holding plates and butterfly nuts between the fin assemblies. 1. Make sure the heater is unplugged and the power and setting control is in the “0”(OFF) position. 2. TURN THE HEATER UPSIDE DOWN. 3. Attach the wheel holding plates onto the heater as Fig.1 shows. One is fixed between the last two fins and the other one is fixed next to metal control box. 4. Insert the butterfly nuts and tighten them securely. Fig.1 5.
Place the heater on a firm level surface free from obstructions, and at least 3ft. away from any wall and any other objects such as furniture, curtains, plants or combustible material. With the Power and Setting Control “ B ” in the “ 0 ” position, plug the heater into a grounded 120V outlet. Turn the heater “ON” by turning the Power and Setting control “ B ” clockwise to your desired power setting (1, 2, 3). The Power Indicator Light “A” will illuminate.
CLEANING AND STORAGE It is recommended that the heater be cleaned at least one time during the operating season in order to provide the optimum level of performance. ALWAYS TURN THE POWER SWITCH OFF AND UNPLUG THE HEATER BEFORE CLEANING. Be sure to save the box for offseason storage. Turn the heater “OFF”, unplug it and wait for the heater to cool down. Use a dry cloth to clean only external surfaces of the heater. Do not use any cleaning agents or detergents. Never immerse the heater in water.
SERVICE & SUPPORT In the event of a warranty claim or if service is required for this heater, please contact us at the following: Tel: 866 646 4332 Email us at: customerservice@supportuscenter.
Free 3 months extension* of the original limited warranty period! Simply text a picture of your proof of purchase to: 1-844-224-1614 *The warranty extension is for the three months immediately following the completion of the product's original warranty period.
en sp MANUAL DEL USUARIO Calentador Eléctrico Tipo Radiador Con Aceite HO-0279 Voltaje nominal: 120V Potencia nominal: 600 ~ 1500W Frecuencia: 60Hz Aviso de advertencia: antes de usar este producto, lea atentamente este manual y consérvelo para futuras referencias. Para soporte adicional, llame al servicio al cliente en el número de teléfono 1-866-646-4332. El diseño y las especificaciones están sujetos a cambios sin previo aviso para la mejora del producto.
POR FAVOR LEA Y GUARDE ESTAS IMPORTANTES INSTRUCCIONES DE SEGURIDAD Cuando se utilizan electrodomésticos, se deben seguir siempre ciertas precauciones básicas para reducir el riesgo de incendio, descarga eléctrica y lesiones personales, incluyendo las siguientes: 1. Lea todas las instrucciones antes de utilizar este calentador. 2. Este calentador se calienta cuando se utiliza. Para evitar quemaduras, no deje que la piel entre en contacto con las superficies calientes.
INSTRUCCIONES PARA DESEMPACAR Y CONFIGURAR Desempaque su calefactor y retire los dos ensamblajes de las ruedas del aledas. 1. Asegúrese que el Calentador esté desenchufado y en la posición “O” (OFF). 2. DE VUELTA AL CALEFACTOR. 3. Instala la placa de sujción de las ruedas en el calendador como lo que sigue. Una esta fija debajo de las dos finales aledas y la otra esta fija debajo de la caja de control. 4. Inserte las tuercas mariposa y atorníllelas firmemente. 5.
Ubique el calentador en una superficie nivelada y firme, libre de obstrucciones, y al menos a 3 pies de distancia de cualquier pared u otros objetos comomuebles, cortinas, plantas o materiales combustibles. Con el Control de Encendido y Posición “B” en la posicion “0”, enchufe el calentador en un tomacorriente con descarga a tierra de 120 Voltios.
LIMPIEZA Y ALMACENAMIENTO Se recomienda limpiar el calentador al menos una vez durante la temporada de utilización para proveer un óptimo nivel de desempeño. SIEMPRE APAGUE Y DESENCHUFE EL CALENTADOR ANTES DE LIMPIARLO. Asegúrese de guardar la caja para guardarlo en la estación en que no se utiliza. Coloque el calentador en la posición “OFF”, desenchúfelo y espere que el calentador se enfríe. Utilice un paño seco para limpiar sólo las superficies externas del calentador.
SERVICIO Y SOPORTE En caso de reclamos de garantía o si se necesita servicio para este calentador, por favor, póngase en contacto con nosotros a los siguientes números: Gratis: 866 646 4332 Envíenos un mensaje de correo electrónico a: customerservice@supportuscenter.