Pella® Insynctive® Product Guide Pella® Lifestyle Series Motorized, Integrated Blinds and Shades
Table of Contents 4 General and Safety Information NEED HELP? For instant access to warranties, troubleshooting information and videos, visit Pella.CustHelp.com or call 855-473-5524. General and Safety Information Need Help? Have a Home Automation System? Warnings 5 HAVE A HOME AUTOMATION SYSTEM? To view a list of compatible systems and contact your home automation provider for further information, visit ConnectPella.com.
Product Overview Pella® Lifestyle Series Motorized, Integrated Blinds or Shades PELLA® LIFESTYLE SERIES MOTORIZED, INTEGRATED BLINDS or SHADES help to improve the comfort and convenience of your home. BLIND or SHADE may be controlled with a remote, app or a compatible home automation system. The slats of BLIND may be tilted to control privacy or the amount of light entering a room.
Pella® Lifestyle Series Motorized, Integrated Blinds or Shades (continued) Pella® Lifestyle Series Motorized, Integrated Blinds or Shades (continued) 4. Test BLIND or SHADE. LED LIGHT • Press the Down button to move BLIND or SHADE down. • Press the Up button to move BLIND or SHADE up. UP BUTTON 5. Set up BLIND or SHADE. CENTER BUTTON DOWN BUTTON Program upper position. • Touch the top end of REMOTE to BLIND or SHADE cover approximately 6” from the end where the wire connects.
Pella® Lifestyle Series Motorized, Integrated Blinds or Shades (continued) Pella® Lifestyle Series Motorized, Integrated Blinds or Shades (continued) OPERATING BLIND OR SHADE WITH REMOTE LED LIGHT UP BUTTON CENTER BUTTON DOWN BUTTON PAIRING TO PELLA® INSYNCTIVE® BRIDGE • Press and release Up button: Pressing the Up button for less than 1 second will cause BLIND or SHADE to automatically move to the upper position that has been programmed by the user.
Additional Instructions Additional Instructions (continued) CHARGING BATTERY IN BLINDS AND SHADES REPLACING BATTERIES The solar panel requires approximately 3 hours of direct sunlight each day to charge the battery for BLIND or SHADE operation solely by power generated from the exterior solar panel. Additional charging is necessary when the solar panel on the exterior of the unit does not receive adequate sunlight.
Additional Instructions (continued) “HOMING” THE BLIND OR SHADE LED LIGHT UP BUTTON CENTER BUTTON DOWN BUTTON Over time, you may notice that the fully opened position for raise-andlower BLINDS or bottom-up SHADES or the fully closed position for top-down SHADES has drifted. This is due to normal wear and use of BLIND or SHADE and can be corrected by homing BLIND or SHADE. The homing process will cause BLIND or SHADE to move up until it is fully compressed. BLIND or SHADE then resets the position.
FCC Compliance and Industry Canada This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
