User's Manual

ManualsBrandsPelican Accessories ManualsElectronicsLow Powered Transceiver

WaveStation

For

PlayStation 2, PlayStation, & PSone

Instruction Manual

WaveStation Features

• Wireless docking station with RF

• (Radio frequency) 900 MHz Technology

• Compatible with all PlayStation 2 / PSone

(and Original PlayStation) controllers

• WaveStation is also compatible with

PlayStation 2’s Analog Touch and Dual

Shock Technologies

• Up to 50 feet of freedom

• 50 hours of battery life with 4 C batteries (not

included)

• Optional 6 volt AC adapter (not included)

Summary of content (6 pages)

PAGE 1
WaveStation For PlayStation 2, PlayStation, & PSone Instruction Manual WaveStation Features • • • • • • • Wireless docking station with RF (Radio frequency) 900 MHz Technology Compatible with all PlayStation 2 / PSone (and Original PlayStation) controllers WaveStation is also compatible with PlayStation 2’s Analog Touch and Dual Shock Technologies Up to 50 feet of freedom 50 hours of battery life with 4 C batteries (not included) Optional 6 volt AC adapter (not included)
PAGE 2
WaveStation Receiving Unit Layout Rubber Spacer Connects to PS2 or PSone Signal LED P2 LED P1 LED Solid LED Flashing LED P1 LED Controller 1 has connectivity Controller 1has no connectivity P2 LED Controller 2 has connectivity Controller 2 has no connectivity Signal LED The Signal LED indicates signal Strength.
PAGE 3
WaveStation Docking Unit Layout P1 / P2 LED have a simple function. They flash when there are no peripherals plugged in or when the peripheral in not recognized. They remain ON when a recognized peripheral is plugged into controller port 1 or 2. The Signal LED indicates valid received rumble data from the Game Console to the Docking Unit. A solid LED indicates valid rumble data received from the game console. If the LED flashes quickly, it indicates that rumble data did not make it to the controller.
PAGE 4
Thank you for purchasing the WaveStation Instruction for operation 1. Make sure the power is turned off on your PlayStation® 2 or PSone® and insert the WaveStation Receiving Unit into both controller ports When using PSone® or original PlayStation® game system, remove the rubber spacer on the Receiving Unit, slide the Controller port 2 on the Receiving Unit right, and place the rubber spacer in the space between the two controller ports. Rubber Spacer Controller port 2 Controller port 1 2. 3. 4. 5.
PAGE 5
WaveStation Advance User Instructions WaveStation has the ability to use 6 different channels to ensure there is no signal interference. NOTE: Leave these settings set to the factory settings unless you are experiencing signal interference. There is a channel selector on the bottom of the Receiving Unit and inside the battery compartment of the Docking Unit. If the channels are changed they must be the same on both units.
PAGE 6
LIMITED WARRANTY Pelican Accessories warrants to the original consumer purchaser that the product will be free from defects in materials and / or workmanship for a period of 120 days from the date of purchase. If a defect covered by this warranty occurs during this period, Pelican Accessories at its option will repair or replace, at no charge, any part that Pelican Accessories determines to be defective.