User's Manual

ManualsBrandsPelican Accessories ManualsElectronicsGame Console Transceiver for Wireless Controller

CHANNEL

1 2 3 4

OFF ON RUMBLE

OFF

BACK

START

Instruction for Operation:

LIMITED WARRANTY

Pelican Accessories warrants to the original consumer purchaser that

the product will be free from defects in materials and / or workmanship

for a period of 120 days from the date of purchase. If a defect covered

by this warranty occurs during this period, Pelican Accessories at its

option will repair or replace, at no charge, any part that Pelican Accessories

determines to be defective.

To obtain warranty service during the warranty period, send the defective

product postage pre-paid, with a money order for $4.00 to cover the

return postage and handling, along with proof of purchase and the date

of purchase to:

PELICAN ACCESSORIES

1840 East 27th Street

Vernon, CA 90058

This warranty shall not apply if the product has been damaged by abuse,

misuses, negligence, accident, modification, tampering or by any other

causes unrelated to defective materials and / or workmanship.

Repair or replacement as provided under this warranty is Pelican

Accessories' exclusive prerogative. ANY APPLICABLE IMPLIED

WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE ARE HERBY LIMITED

TO 120 DAYS FROM THE DATE OF PURCHASE AN ARE SUBJECT

TO THE CONDITIONS SET FORTH IN THIS LIMITED WARRANTY. IN

NO EVENT SHALL PELICAN ACCESSORIES OR INCIDENTAL

DAMAGES RESULT FROM THE BREACH OF ANY EXPRESS OR

IMPLIED WARRANTIES. This warranty gives you specific legal rights,

and you may also have other legal rights,

Which vary from state to state.

Instruction for Operation:

PL-2006

BAND

White

Botton

Analog

Stick

D-Pad

PRODUCT OVERVIEW:

Eclipse Wireless Controller uses advance technology which gives you the ability to play without

the limitations of a typical corded controller, hence there are a few switches and LED (lights)

not found on your basic Xbox™ Controller.

Channel Switch (Receiver and Controller):

This switch selects the broadcast channel of the radio frequency. There are four positions;

1, 2, 3 and 4. There is a corresponding Channel Switch on the receiver

Band Switch (Receiver and Controller):

This switch selects the bandwidth. There are two positions; A and B. There is a corresponding

Band Switch on the receiver

Power Switch (Controller):

This switch selects the power mode. There are 3 positions; Off, On, and Rumble Off

INSTRUCTIONS:

1. Insert Batteries:

Remove the battery lid and place the two AA batteries (included) into the Eclipse Wireless

Controller. Make sure they are inserted as shown in the battery compartment. The batteries

included are not long life.

2. Plug in the Receiver:

With the Xbox™ turned off, plug the cable of receiver into controller port one (far left port.)

3. Check Band setting:

Confirm that the Band Switch is set to A on both the controller and the receiver.

Note:the only time you would ever change this switch is if you experienced a drop off in the

signal, causing game play to be suspended. If this happens repeatedly we suggest

you switch to Band B on both the Controller and Receiver.

4. Select a Channel on the Controller:

You may select any channel you desire 1, 2, 3 or 4.

5. Select a Channel on the Receiver:

This must match the channel selected on the Controller.

Note: If using more then one controller you must use different channel settings, i.e., the first

controller and receiver are set to Channel 1, the second controller and receiver are

set to Channel 2. The channel position selected on the Eclipse Wireless Controller

and Receiver have no relation to the Xbox™ controller ports.

6. Turn ON the Controller

Turn the power switch located on the Controller to the ON position - You will see the following:

On the Controller the LED will come on, lit green

Note:If the LED on the pad comes on and goes to Red this is your low battery indicator

meaning your battery has less then 20% power capacity.

On the Receiver, the left LED will come on indicating there is a "Pad in". The right LED will

flash continually indicating the signal is strong

Note: If you wish to extend battery life select the rumble off position. This will turn off the

rumble effect in game play, resulting in a doubling of your battery life.

OTHER FEATURES:

Multiple Players:

You may play with up to four Eclipse Wireless controllers. Check to see that the channel

switches are set as outlined above.

Power Save Mode:

When not in use the Eclipse Wireless controller automatically goes into a sleep mode

to conserve batteries. A touch of any button puts the controller back into play mode.

Note: Turn off the controller when not in use to extend your battery life.

For technical questions please visit

http://www.pelicanacc.com

or call us directly at 1-800-331-3844

Action

Buttons

Analog

Stick

Black

Button

Channel Switch

Power

On/Off-

Rumble

Off Switch

Start Button

Band

Switch

Black

Button

White

Button

Back

Botton

LED

BAND

1 2 3 4

CHANNEL

SIGNAL

Link LED (Red)

Channel Switch

Band Switch

Signal LED (Red)

Memory Card Slots

L Botton R Botton

Changes or modifications not expressly approved by the manufacture could void the

user's authority to operate the equipment. This device complies with Part 15 of the

FCC Rules. Operation is subject to the following two conditions; (1) this device may

not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Eclipse Wireless Controller

Eclipse Wireless Receiver

Pelican and its logo are registered trademarks.

Xbox™ is a registered trademark of

Microsoft Corporation.

This product is not designed, manufactured,

sponsored or endorsed by Microsoft Corporation.

Up to 50 Feet of Range

Over 100 Hours on Two AAs

8 Separate Channels

Dual Rumble Motors

Forward Positioned Black and

White Buttons

Low Battery Indicator