Spec Sheet

C277 / REVISED 1-06
International Standards
Organization Registered Firm;
ISO 9001 Quality System
PRODUCT SPECIFICATION
camera solutions
EM3512 Mount
WALL MOUNT, EH3512 ENCLOSURE, 24 VAC
Product Features
• Specifically Designed for EH3512 Enclosures That Use 24 VAC
• Wiring Concealed Inside Mount
• Video, Power Wiring Pre-Installed
• Adjustable Pan/Tilt Head
• Mounts to Wall or Electrical Box
• Pole, Corner Mount Adapters Available
The EM3512 feedthrough wall mount provides an attractive indoor/
outdoor mount for EH3512 enclosures that use 24 VAC power.
Specifically, it is designed for use with the EH3512 enclosure (when
a 24 VAC camera is installed), the EH3512-2, and the EH3512-2HD.
All wiring is concealed inside the mount. With the video and power
wiring pre-installed, hook-up is easy and simple.
The mount can be attached to a wall surface or a single-gang electrical
box. The PA3512 pole mount adapter is available for attaching the
mount to a pole, and CM3512 corner mount adapter can be used for
installation of the mount on the corner of a building.
An adjustable head allows 320 degrees of horizontal rotation. Tilt
adjustment can be up to 90 degrees above or below the horizontal
position.
The EM3512 is constructed of aluminum and has a gray powder coat
finish.
U.S. Patents D-486,173 S and 6,824,318 B2
EM3512 MOUNT WITH EH3512 ENCLOSURE
TO P
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
3.57
(9.06)
4.88
(12.40)
11.60 (29.46)
3.40
(8.63)
4.96
(12.59)
3.25
(8.25)
2.25
(5.71)
2.25
(5.71)