Spec Sheet

PRODUCT SPECIFICATION
camera solutions
C1405 / REVISED 1-27-11
International Standards
Organization Registered Firm;
ISO 9001 Quality System
EH4700 Series Enclosure
OUTDOOR, MEDIUM
Product Features
• Designed for Indoor/Outdoor Applications
• For Use with Fixed Mount or Pan/Tilt
• Die-Cast and Extruded Aluminum Construction
• Gas-Spring-Assisted, Forward-Opening Lid
• Cable Entry Glands and Mounting Holes Located on Bottom of
Enclosure
• Special Options Include 120 VAC Outlet and Preset Lens Wiring
Harness
The EH4700 Series are indoor/outdoor enclosures constructed from
die-cast and extruded aluminum. Available in an 18-inch (45.72 cm)
length ( EH4718 ) and 22-inch (55.88 cm) length ( EH4722 ), these
enclosures are designed to accept larger format cameras with either
fixed focal length lenses or motorized zoom lenses. The camera sled
is removable and can be inverted to accommodate various camera and
lens combinations.
The enclosure opens from the rear by unlatching the rear-mount,
link-lock latch. The forward-opening lid allows for maximum
accessibility during installation/servicing and can be removed, if
necessary. A unique gas spring securely holds the lid when fully
opened. If desired, the link-lock latch can be secured with a padlock
of suitable size for additional security.
The EH4700 Series is available with a full complement of factory-
and field-installed accessories which include blower, heater, window
defroster, sun shroud, thermal insulation, 120 VAC electrical outlet,
and preset position lens wiring harness.
The EH4700 Series can be used in fixed mount applications or
mounted to a medium duty pan/tilt, such as our PT570 Series.
EH4718
ENCLOSURE WITH SUN SHROUD
6.87
(17.45)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
2.00
(5.08)
5.00
(12.70)
C
B
A
2.25
(5.72)
1/4-20, 3X
DIM. MODEL
21.2 (53.84) EH4718
A
25.2 (64.00) EH4722
18.3 (46.48) EH4718
B
22.3 (56.64) EH4722
7.00 (17.78) EH4718
C
9.00 (22.86) EH4722