Spec Sheet

ManualsBrandsPelco ManualsElectronics128 Channels Network Video Recorder without Optical Disk Drive, 8TB

PRODUCT SPECIFICATION

video management solutions

C4014 / REVISED 2-25-16

International Standards

Organization Registered Firm;

ISO 9001 Quality System

Digital Sentry

DSSRV2 Network Video Recorder

H.264 CAPABILITY, FULLY SCALABLE HARDWARE/SOFTWARE SOLUTION

Product Features

• Increased data rate of up to 350 Mbps (RAID) or 300 Mbps (JBOD)

total throughput, allowing the server to support more users and play

back more cameras simultaneously than previous DSSRV models

• 4TB storage drives provide 33% more storage over DSSRV 3TB

models at no additional cost; systems previously utilizing two or

more servers can now be built on a single server

• SSD system drive, with increased read-write speeds and no moving

parts, increases overall system responsiveness and reliability

• Supports up to 128 IP Camera Streams; up to 64 Analog Cameras*

• Records H.264, MJPEG, and MPEG-4 IP Streams

• Supports Pelco and Third-Party IP Cameras and Network Encoders

• Compatible with DS ControlPoint for Simultaneous Monitoring of All

DS Series and DX Series Products in a Single Client Interface

• Network Health and Event Monitoring Support Through SNMP and

New Digital Sentry

System Information (DSSI) Utility

• Compatible with the DS Archive Utility

• Recording Rate Configurable per Individual Camera

• VideoXpert Ready. Migrate to VideoXpert, bringing your products

forward into a next generation VMS

Optimized For Video Surveillance

The Digital Sentry® Network Video Recorder (DSSRV2 NVR) is

optimized by Pelco to deliver the essential hardware support for the

DS NVs video management software (VMS) without the extra cost or

risk of integrating hardware and software.

Boosted by the 4th Generation Intel® Xeon™ processor and 8 GB of

RAM, DSSRV2 NVR provides an optimal combination of processing

power and reliability to meet the demands of HD video recording and

playback operations. The system is powered to support up to 128

combined IP and analog video streams, with up to 64 analog cameras

supported via the optional ENC5516 direct-attached encoder. Analog

streams are also supported using Pelco and third-party encoders.

The DSSRV2 NVR boasts total throughput of up to 350 Mbps

(300 Mbps for JBOD models) for recording analog and IP video

streams as well as playback and export through the DS ControlPoint

client. The increased data rate over original DSSRV models allows

more users to play back video from the server simultaneously. When

determining the maximum number of cameras and the desired frame

rate to host on each system, the number of concurrent client

connections, the number of streams played back per client, and the

bandwidth required for client connections must be considered.

The DSSRV2 NVR functions as a stand-alone system or as part of a

network of servers, monitored from the DS ControlPoint user

interface. The system can be deployed solely as a network video

recorder, as a digital video recorder (DVR), or as a hybrid NVR.

Two gigabit network ports provide for convenient network

architecture planning by allowing one port to be dedicated to

IP cameras, while the second network port is used for client

connections. Two DisplayPorts ports provide a convenient connection

for high resolution digital monitors for use with HD cameras.

DSSRV2 models are available with DIACAP/DIARMF-ready software,

for use in secured environments implementing information assurance

security standards.

Reliability

DSSRV2 models incorporate an SSD system drive. With increased

read-write speeds and no moving parts, the SSD system drive

increases the reliability, uptime, and responsiveness of the system.

DSSRV2 systems now support 4TB drives, increasing capacity by

33% over original DSSRV models without increasing cost. With front-

available storage drives for easy servicing and upgrades, the DSSRV2

NVR is available with up to 20 TB storage for models without the

optional optical disk drive (ODD), or up to 16 TB for ODD models. The

drives are hot-swappable when configured for internal RAID 5

storage.

External storage is supported through USB attached storage or by

using the optional DSSRV-SCSI interface card to connect to external

SCSI storage targets such as the DX8100HDDI, providing additional

storage of up to 24 TB. The external storage can be configured for

either JBOD storage or for software controlled RAID 5 storage.

*The DS NVs database is limited to 128 cameras. The actual number of

cameras the server supports depends on camera settings, client activity,

network bandwidth, and the available throughput of the DSSRV2.

Summary of content (4 pages)

PAGE 1
PRODUCT SPECIFICATION video management solutions Digital Sentry® DSSRV2 Network Video Recorder H.
PAGE 2
TECHNICAL SPECIFICATIONS Open Architecture The cornerstone of Digital Sentry design, a fully Open Architecture, is provided through ONVIF compliance and support for a large number of IP-specific drivers. Users can choose specific IP cameras or encoders to fit their application. Eliminate the risk of deferred support that comes with VMS software from one vendor and a general purpose hardware platform from another.
PAGE 3
TECHNICAL SPECIFICATIONS SYSTEM Processor Operating System Internal Memory NETWORK ® Intel Xeon E3-1275 v3 Windows 7 Ultimate 64-bit 8 GB DDR3 non-ECC RAM; 16 GB DDR ECC RAM for DSSRV2-RD models User Interface DS ControlPoint Internal Storage (JBOD or RAID 5*) DSSRV2 500 GB, 4 TB, 8 TB, 12 TB, 16 TB, 20 TB DSSRV2-DVD 500 GB, 4 TB, 8 TB, 12 TB, or 16 TB DSSRV2-RD 12 TB, 16 TB, 20 TB, or 24 TB RAID Level Internal RAID 5 (requires DSSRV-RAID controller card for hot-swappable drives) External Storage Pelco’s
PAGE 4
TECHNICAL SPECIFICATIONS MODELS OPTIONAL ACCESSORIES The following table describes model numbers for DSSRV2 products. For example, the model number for a 12 TB, DSSRV2 device with a United Kingdom power cord is DSSRV2-120-EUK. The model number for a 8 TB, DSSRV2-DVD device with an North American power cord is DSSRV2080DV-US. Models ending in D are for use in DIACAP/DIARMF securityenabled environments.