Spec Sheet

PRODUCT SPECIFICATION
camera solutions
C3419 / REVISED 11-6-09
International Standards
Organization Registered Firm;
ISO 9001 Quality System
Heavy-Duty Spectra
®
IV SE Series
BACK BOX AND LOWER DOME
Product Features
• Tough, Heavy-Duty Construction
• Improved Bubble Design
– 0.090-Inch Injection Molded Polycarbonate
– Increased Optical Clarity
– 3.5X Stronger Than Previous Heavy-Duty Bubbles
– Available in Clear and Smoked Bubble
• Trim Rings Are Constructed of Thick Aluminum
• Protective Cage for Lower Dome (Optional)
• Built-in Back Box Memory
• 2 Auxiliary Outputs
• 7 Alarm Inputs
• Integrated Passive UTP Circuit
• Compatible with 27X and 35X Spectra
®
IV SE Dome Drives
• In-Ceiling and Pendant Models Available
• Indoor/Outdoor Applications
• Pendant Models Meet NEMA Type 4X and IP66 Standards
• Ability to Add IP Network Capability by Purchasing Optional TXB-IP
Module
Pelco’s Heavy-Duty Spectra
®
IV SE Series is ideal for
installations where structural integrity and resistance to vandalism
are a priority. Dual wall construction, added thickness, and a
geometric design enhance the overall durability of the enclosure.
Three Heavy-Duty Spectra IV SE Series back box models are
available. The in-ceiling model (BB4HD-F) has a reinforced mounting
system for added security. The indoor pendant (BB4HD-PG) and
environmental pendant (BB4HD-PG-E) models are strengthened by a
thick shroud and dual wall construction, and meet NEMA Type 4X and
IP66 standards. The environmental pendant includes a heater and
fan.
The Heavy-Duty Spectra IV SE Series has all the features of the
Spectra IV SE dome system (built-in back box memory, two auxiliary
outputs, seven alarm inputs, integrated passive UTP circuit) and is
also compatible with all Spectra IV SE dome drives.
The lower dome of the Heavy-Duty Spectra IV SE Series meets Pelco’s
stringent standards for optical clarity and strength. The lower dome
features a clear or smoked 0.090-inch polycarbonate bubble that is
3.5 times stronger than previous heavy-duty bubbles. The trim ring is all
aluminum construction with two barrel-type key locks to increase the
tamper resistance of the unit.
For installations that face the highest threat of vandalism, models are
available with a protective cage (optional). The cage is designed to
increase the protection of the unit’s bubble with minimal obstruction
of the viewed scene. The camera automatically focuses through the
cage’s bars at medium to high zoom settings, eliminating interference
(as shown below). The cage is removable for cleaning purposes. Cage
hardware is only accessible when the lower dome is removed.
ENVIRONMENTAL PENDANT
BB4HD-PG-E AND LD53HDCPB-1
(SHOWN WITH IWM-GY WALL MOUNT)
IN-CEILING MODEL
BB4HD-F AND LD53HDF-1