Zubehör • Accessories Accessoires • Accesorios Accessori • Accessoires Αξεσουάρ Bedienungsanleitung smart drive kit for the iPhone Operating Instructions smart drive kit for the iPhone Notice d'utilisation smart drive kit for the iPhone Instrucciones de servicio smart drive kit for the iPhone Istruzioni d'uso smart drive kit for the iPhone Handleiding smart drive kit for the iPhone Οδηγίες χρήσης smart drive kit for the iPhone Operating Instructions smart drive kit for the iPhone Consignes d'utilisa
쮕 smart drive kit for the iPhone Seite 1 smart drive kit for the iPhone Page 9 smart drive kit for the iPhone Page 17 smart drive kit for the iPhone Página 25 smart drive kit for the iPhone Pagina 34 smart drive kit for the iPhone Pagina 42 GR smart drive kit for the iPhone Σελίδα 50
smart drive kit for the iPhone Page 58 smart drive kit for the iPhone Page 66 1 M+P-03F-7806
খ Validity These operating instructions are valid for vehicles equipped with one of the following: • smart Radio 9 • smart Radio 10 • Base Radio (from 10/2010 on) and in conjunction with the following mobile phones: Apple iPhone 3G or Apple iPhone 3GS. Parts included • (1) smart cradle for the iPhone (This will be referred to as "cradle" in these instructions.
Contents Inserting the iPhone into the Cradle Page 61 Pairing the iPhone with the Cradle Page 62 Connecting the iPhone with the Cradle Page 63 Switching to Hands-free Mode Page 63 iPhone Audio Output Page 64 General Operating Instructions Page 64 Removing the iPhone from the Cradle Page 65 - 59 -
GRisk of accident When using the iPhone, always observe the laws and regulations governing the use of mobile phones in vehicles and while driving. If you are going to install your iPhone in the car, use the smart drive software in order to get a larger presentation of the contents in the iPhone's display, which is better adapted to your vehicle. Only use the iPhone when traffic conditions allow for it.
Inserting the iPhone into the Cradle It is only possible to use the hands-free mode and the telephone functions via the radio if a Bluetooth® connection has been established between the iPhone and the cradle, and the smart drive1 software is installed on the iPhone. 2 1 3 M+P-03F-7807 Slide the iPhone (2) from above into the cradle (1) and press it lightly onto the connector (3). 1. smart drive is available in your App Store.
Pairing the iPhone with the Cradle The iPhone must be in the vehicle but may not be inserted in the cradle for pairing. Note When pairing with the cradle, the iPhone should be fully charged. 1. Turn the ignition key to position 1, 2 or 3. (Please refer to the vehicle Operator's Manual.) The cradle will be available for approx. 2 minutes to establish a Bluetooth® connection and can be recognized by the iPhone. 2. Select Settings General Bluetooth on the iPhone and set the button to I.
Connecting the iPhone with the Cradle After coupling, a connection between the iPhone and the cradle is established automatically. 1. Place the iPhone into the cradle and turn the ignition key to position 1, 2 or 3. (Please refer to the vehicle Operator's Manual.) 2. Start smart drive on the iPhone. (Please refer to the iPhone manual.) 3. Switch on the radio. (Please refer to the Audio operating instructions.) Note There will always be only one iPhone connected with the cradle.
iPhone Audio Output iPhone audio files can be played via the radio. 1. Place the iPhone into the cradle and turn the ignition key to position 1, 2 or 3. (Please refer to the vehicle Operator's Manual.) 2. Switch on the radio and select AUX. (Please refer to the Audio operating instructions.) 3. Start smart drive on the iPhone. (Please refer to the iPhone manual.) 4. Start playback of the desired audio file on the iPhone. (Please refer to the iPhone manual.
Removing the iPhone from the Cradle 4 2 1 M+P-03F-7809 Press the catch (4) toward the rear and remove the iPhone (2) up out of the cradle (1).
© 2010, Mercedes-Benz Accessories GmbH Nachdruck, Vervielfältigung oder Übersetzung, auch auszugsweise, nicht erlaubt.