User's Manual

LEDs
1 Power Green indicates that 15V power is present and the gateway is powered on
O indicates that there is no power to the gateway
2 Cloud connectivity Green indicates connectivity is established with the backend
status (S/W controlled) O indicates connectivity to the backend
3 Controller status Green indicates that the gateway is active and in Normal mode
Yellow indicates that the Linux OS has booted
Red indicates that uBoot is complete
Blinking green indicates that the gateway is in Test mode
Blinking and other color combinations under S/W control. Can be used
and assigned by application developers.
O during initial power up or when rebooting
4 ZigBee Primary Green indicates that the ZigBee controller is active
RF interface active Blinking green indicates that the ZigBee controller is in Pairing mode
(S/W controlled) O indicates that the ZigBee controller is inactive
5 Z-Wave Secondary Green indicates that the Z-Wave controller is active
RF interface active Blinking green indicates that the Z-Wave controller is in Inclusion mode
(S/W controlled) O indicates that the Z-Wave controller is inactive
Cisco Connected Life Gateway
Model CLG-8202-WW
Installation Guide
Welcome
The Cisco Connected Life Gateway Model CLG-8202-WW
is a key component of the Cisco Smart and Connected
Home proposition. This service delivery platform
communicates with other network devices to provide
home security, home automation, and energy management
solutions as well as life and health monitoring and support
services. Contact your service or applications provider for
more information about Cisco Connected Life products.
POWER
MAC: 2CABA452C858
SKU: CL-72211230NA-K9
Factory ID: F2
Model No:
CLG-8202 NA
Date of mfg: 14/06
INTERNET
S/N: 254457522
15V DC
1.5A
22.5W
1 2 4
T16511
3
Bottom Panel
1 Power Connects to the included power adapter in the
Connected Life Gateway kit
2 Power switch Switches power on and o
3 Ethernet ports Connects to an RJ-45 Ethernet port on a PC or
router
4 USB 2.0 port Connects to client devices that use a USB 2.0
connector
Side Panel
1 USB 2.0 host port Connects to client devices that use a USB 2.0 connector
2 Pairing/Reset button Functions depending on user-de ned applications
ZigBee
STATUS
1
2
3
4
5
T16510
1
2
T16515
PAIRING/RESET