User Manual FCC ID: 2AG5OPB-601-B IC: 23453-PB601B Model Name: PB-601-B ©2019 PB Inc., all rights reserved. pebble bee® is a registered trademark of PB Inc. All other trademarks are property of their respective owners. Granted US patents US9,392,404, US9,564,774, US10,074,049, US9,774,410; 9,900,119; 10,063,331; 9,961,523; 9,892,626, USD790373, USD790372 and other PB Inc. pending patents that have not been published at the time this document was created.
Downloading the App The Pebblebee app can be downloaded by searching for the Pebblebee app in the App Store or by visiting pebblebee.com/download. 1. Please make sure your mobile device has Bluetooth ON. 2. Once downloaded, please allow all permissions for full operation. See Quick Tips on following steps for more information.
Quick Tips
Quick Tips
Quick Tips
Setting up the App The Pebblebee app can be downloaded by searching for the Pebblebee app in the App Store or by visiting pebblebee.com/download. 1. Open the Pebblebee App. 2. Enter your email and tap the Submit button. 3. Open your email and retrieve your activation code. 4. Enter your code in the app and tap Submit Code.
Claiming your BlackCard Now that you have an account, you can claim your brand new BlackCard! 1. Tap the bee icon on top to show a list of all claimed devices and the claiming button. 2. Tap on Add Device to access the claiming screen. 3. Double press your BlackCard’s button (the center front of the device) 4. The app will prompt you to name your device, then will add it to your account. The name can be changed later.
Using the BlackCard From this screen, you can do just about anything. 1. Find - Tap on FIND to Beep and Flash your BlackCard when it’s within range of your phone. While beeping, the BlackCard’s alarm can be stopped by pressing the BlackCard’s button. 2. Map - The map will show the last known location of the Black Card, which is the last time it was within range of the app. Tap on the map to expand it. 3. Menu - Tap here to see overall account information. 4.
BlackCard Settings Black Card Details: ● ● ● ● ● ● ● Change the name of your BlackCard Check the battery status of the BlackCard Change the tone that’s used for the Find Phone feature or turn it off entirely Enable the Left Behind Alert Set the keyword used to find the device with voice assistants (Google Assistant or Amazon Alexa) Mark device as Lost Delete your Black Card from the account. Deleting it removes all settings.
Voice Assistants The Pebblebee app now offers Amazon Alexa and Google Assistant integrations. That way if you can’t find your phone and Black Card, you can ask Alexa or Google to find them for you through voice commands. To set up, go to the Account settings page in the app. Then, follow the directions to get started.
Crowd GPS & Left Behind Features Left Behind When the Left Behind alert is enabled, you’ll receive an alert when the phone notices that your Black Card has been out of range for too long (~10 minutes). Crowd GPS If your device is out of range and can’t be found, mark it as Lost. When it comes within range of any Pebblebee app user, you’ll get a notification alerting you to its new location.
Re-enabling Permissions If you’ve disabled some permissions, here’s how you can re-enable them: Go to your phone’s Settings. Scroll down the list and tap on Pebblebee.
Disclaimers The Following slides are Disclaimers and safety information
Battery Safety This product contains lithium, organic solvent, and other combustible materials. For this reason, improper handling of the battery could lead to distortion, leakage (Leakage is defined as an unintended escape of liquid from a battery) , overheating, explosion, or fire and cause human injury or equipment trouble. Please strictly observe the following safety instructions: Never swallow. Never charge. Never heat. Never expose to open flame. Never disassemble.
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
