User Manual

mB
3
Loudspeaker Introduction
Congratulations on your purchase of the Peachtree Audio mB
3
loudspeaker. These speakers
may look small and cute but they are capable of a big sonic soundstage. The three inch driver is a
special wide-bandwidth design that ensures excellent bass response and treble extension beyond
14Khz. The cabinet construction is MDF covered in a high quality gloss black finish..
The mB
3
will provide outstanding performance and years of listening enjoyment.
Hookup is simple.
The positive(+) speaker wire from your amplifier attaches to the positive terminal on the mB
3
Positive terminals are almost always color coded RED. The negative(-) speaker wire from your
amplifier attaches to the negative terminal on the mB
3
. Negative terminals are almost always color
coded BLACK.
Speaker Stands
The supplied stands for the mB
3
are designed to allow horizontal and
vertical mounting.. Use the threaded
inserts right below the speaker
terminals for vertical mounting.
Use the threaded inserts close to
the serial number for horizontal
mounting.
Designed in USA
Made in China
SERIAL NO
Designed in USA
Made in China
SERIAL NO
s4.5
s4.5
s4.5
s4.5

Summary of content (2 pages)