PDI-TR100 TABLE RADIO
TABLE RADIO PDI-TR100 CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated"dangerousvoltage"within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
TABLE RADIO PDI-TR100 institutions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
安 全TABLE 警PDI-TR100 告RADIO 目录 CONTENTS Read this manual carefully to get the best performance from this unit.
TABLE RADIO PDI-TR100 Package contents 1 3 2 5 4 TA B P DL E I-T RA R1 DIO 00 6 1.PDI-TR100 unit 1PC. 2.15V AC adaptor 1PC. 3.FM antenna 1PC. 4.AM antenna 1PC. 5.2XAAA batteries 2PC. 6.Owners manual 1PC.
TABLE RADIO PDI-TR100 Mount clock battery Menu BASS -3 > +3 TREBLE -3 > +3 ALARM ALM OFF ALM On HOUR Min 2 x AAA Specifications · FM/AM tuner. · FM Frequency range: 87.5108MHz. · AM Frequency range: 5301700KHz. · Wireless audio output. · Driver: 3” full range. · Back-lit display. · TV channel selection. · INPUT:15V 1.6A DC, external power supply. · OUTPUT:Battery back-up for clockAlarm function. · Working temperature: -5C to +40C. · Size: H120xD140xW180mm.
TABLE RADIO PDI-TR100 Front panel 5 4 1 3 2 (1)VOLUME KNOB · Adjust the volume knob to desired listening level. · Push for mute and push again or tuning the knob to turn on the volume. (2) FUNCTION KNOB · STANDBY (Display the clock) · TV MODE · FM MODE · AM MODE (3)TUNING KNOB · Adjust the “TUNING” to choose the radio station . · Adjust the “TUNING” to choose the TV station. · Longpush “TUNING” for 3 seconds to enter the “MENU”.
TABLE RADIO PDI-TR100 Rear panel CLOCK BATTERY FM ANTENNA PAIR CLOCK SET SCAN DC15V-1.6A AM ANTENNA 6 7 8 9 10 11 12 13 (6) FM EXTERNALANTENNAJACK · Connect the enclosed external FM antenna if reception is poor ,You can also connect a communal aerial. (7)AM EXTERNALANTENNAJACK · Connect the enclosed external AM antenna if reception is poor ,You can also connect a communal aerial.
TABLE RADIO PDI-TR100 OPERATION (1) AM/FM OPERATION Make sure the DC power adaptor is connecting to the unit . ——Choose the function to AM/FM mode, Adjust the “TUNING”(3)to choose the desired radio station . ——Fine tune by short adjust AM -/+10KHz, FM -/+100KHz. ——Choose the function to AM/FM mode,push “SCAN”(10)on the rear panel. After scan,”M01-M20” will display on the right corner of the LCD. Adjust the “TUNING”(3)to choose the radio station. If you want cancel the scan, push the “SCAN”(10)again.
TABLE RADIO PDI-TR100 . “MENU”will display on the LCD.Push “TUNING”(3)to choose the “BASS” FUNCTION,Adjust the“TUNING”(3) right or left to choose the range from -3----+3. In TV/FM/AM mode , ,long push the “TUNING”(3) for 3 seconds. “MENU”will display on the LCD. Push “TUNING”(3)to choose the “TREBLE ” FUNCTION, Adjust the“TUNING”(3) right or left to choose the range from -3----+3. (5)ALARM CLOCK In SATANDBY /TV/FM/AM mode ,long push the “TUNING”(3) for 3 seconds. “MENU” will display on the LCD.