manual

© 2006-2010 PCT International, Inc. www.pctinternational.com All rights reserved. PubNo.IS.PCT.Amp.V4.201009
Corporate Headquarters: 2260 W Broadway Rd | Mesa, Arizona 85202-1898 | USA | Tel [phone] | Fax [phone] | [e-mail]
INSTRUCTION SHEET
PCT-MA2-xP / PCT-MA2-xPN
MULTIMEDIA DROP AMPLIFIER
(PCT-MA2-M, PCT-MA2-2P,
PCT-MA2-4P, PCT-MA2-8P)
Ver 4 20100916
A. GENERAL INSTRUCTIONS (OPTIONS 1 & 2)
1. Install type F-male connectorized input coaxial cable to the
“RF IN” port.
2. Install type F-male connectorized RF coaxial cable to the
“RF OUT” port.
3. Verify AC voltage rating of power source conforms with AC/DC adapter.
B. FOR STANDARD POWERING (OPTION 1)
1. Connect F-male connectorized RF coaxial cable between
“PWR IN” port on the drop amplifier and power adapter F-type
connection.
2. Connect the power adapter to AC voltage source.
C. FOR REVERSE POWERING (OPTION 2)
1. Connect an F-male connectorized RF coaxial cable between the port
“RF OUT /PWR IN” on the drop amplifier and the “TO AMP” port on the
power inserter (PCT-MPI-1G).
2. Connect the F-male connectorized RF coaxial cable to the power
adapter and the “DC IN” port on the power inserter.
3. Connect the F-male connectorized RF coaxial cable from the “TO TV”
port on the power inserter to distribution network.
4. Connect the power adapter to AC voltage source
NOTE: The PCT-MA2 amplifier can be ordered with or without a PCT-MPI-1G power inserter. If a
power inserter is required, it can be ordered separately. Please contact your local PCT sales
office or representative for details.
OPTION 1
Without Power
Inserter
OPTION 2
With Power
Inserter