Tag Talk INSTRUCTION KC ID: R-C-PCT-A20TAGTALK01 FCC ID: 2A3ANA20TAGTALK01 Power Contents Technology co., Ltd.
1. Overview 1) Components • Tag Talk device • C-Type cable • Wrist strap/necklace • Product manual • Tag 20 EA 2) Partial Names FRONT REAR Power Contents Technology co., Ltd.
2. Features 1) Power Management - Power management is possible by operating the product's power switch. - The Tag Talk power consists of three stages: Power Off / Local Mode / Bluetooth Mode. - The device shuts down when the switch is moved to power off. - Local mode and Bluetooth mode are the operating states of the device, and changing the mode does not power off the device. [Picture 2.
3) Charging Management - If you use the product for the first time after purchasing it, please charge the battery sufficiently. - To safely charge the product, check the power cord to ensure that there is no damage. 4) NFC Tagging - When the device is operating normally, you can press the tag button to read data from the NFC. - After entering the nfc button, read the data from the tag when the nfc tag is in the nfc module part of the back of the product.
3. How to use ① Turn on the device by moving the Power Switch on the side of the product to Local Mode. [Picture 3.1] Local Mode ② When the power is turned on normally, a guided voice is output from the speaker. NFC Read functionality is available after the guided voice is output. ③ Move the device close to the NFC tag you want to read. ④ Press the NFC Read button, move the device so that the NFC Tag to be read is within the device's NFC Module recognition range. [Picture 3.
4. Cautions in use - Keep the machine away from hot air balloons (heaters, microwave ovens, etc.), heaters, and high-pressure containers. - Do not disassemble or give a strong impact to the instrument. - Do not pierce the device with a sharps. - Be careful when using it in a wet place, such as a sink or bathroom and do not expose to water. - Be careful as children can eat TAG that is not attached. And keep TAG out of the reach of children. - Do not touch the device or charging terminal with wet hands.
2) Radio Frequency Interference Statement for Class B Digital Devices - This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
6. Specifications Product Name Tag Talk Model name A20TAGTALK01 Dimension 약 5.6(W) × 2.0(H) × 11.5(D) cm Audio 4Ω, 3W Speaker SMPS / DC Power Adapter Adapter Output : 5V, DC, 2.4A Input : 100-240V, AC, 50~60Hz Bluetooth Low Energy(BLE) Only Wireless Wi-Fi 2.4GHz b/g/n RFID 13.56 MHz Battery Lithium-Ion Battery 1000mAh Usage Temperature -10°C ~ 50°C Usage Humidity 5% R.H. ~ 55% R.H. 7. Manufacturer Information Name Power Contents Technology co., Ltd. Tel.