Pitney Bowes Android Based User Interface (PB AB UI) User Manual
PCI Private Limited 35 Pioneer Road North Singapore 628475 Copyright © 2020 PCI Private Limited. All rights reserved. PCI Private Limited is a trademark of PCI Private Limited. All other trademarks are the property of their respective owners. PCI Private Limited endeavours to ensure that the information in this document is correct and fairly stated, but PCI Private Limited is not liable for any errors or omissions.
1. Component Overview 2. FCC, IC and CE Compliance Statements 3.
Component Overview Pitney Bowes Android Based User Interface (PB AB UI) Characteristics Requirements Conditions Operating Temperature +10° C to +50° C (50° F to 122° F) Operating Voltage 5 Volts DC Operating Current 2A max @ 5V Connector Pinouts 2-pin Barrel DC Jack 5-pin Micro USB Connector Pin # Function 1 VUSB 2 D- 3 D+ 4 ID 5 GND The PB AB UI unit has no user-serviceable parts. The device is for the printer using only.
FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator & your body. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must be fixed to US operation channels only.
IC Compliance Statement This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence.
CE Compliance Statement This device complies with Directive 2014/53/EU issued by the Commission of the European Community. A minimum separation distance of 20 cm must be maintained between the user’s body and the device, including the antenna during body-worn operation to comply with the RF exposure requirements in Europe.
Bluetooth: - WLAN 5GHz: Operations in the 5.15-5.35GHz band are restricted to indoor usage for all countries. For single module: In all cases assessment of the final product must be mass against the Essential requirements of the Directive 2014/53/EU Articles 3.1(a) and (b), safety and EMC respectively, as well as any relevant Article 3.2 requirements.
Installation Planning Safety, Reliability, and Accessibility • Use eye protection when performing work that may be hazardous to the eyes. • Use ear protection in noisy work areas. • Wear appropriate clothing/uniforms and safety shoes. • Install equipment so it will not cause damage to the surroundings or work loose over time. • Make sure there are no loose components/cables and no unsecured components. • Route all cables away from hot or abrasive areas.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION DO NOT locate the Product where it: • obstructs a person’s field of vision of the place. • obstructs people walking or accessing certain items. • blocks the deployment of a fire extinguisher, firehose, first aid kit, etc.
