Carfi S100 User Manual Carfi S100 User Manual
Carfi S100 User Manual Content 1 2 3 4 Function description .................................................................................................. 1 Interface and status indicator light description.......................................................... 1 WIFI using steps. ...................................................................................................... 1 Trouble Shooting ....................................................................................................
Carfi S100 User Manual 1 Function description S100 is a high‐speed and cigarette type 4G router. S100 offers the function of data access and SMS of TDD‐LTE/FDD‐LTE/TD SCDMA/WCDMA/GSM etc. 2 Interface and status indicator light description Picture 2‐1 S100 interface and indicator light S.N.
Carfi S100 User Manual network connection traffic by UI software Home If 4G / 3G / 2G network connection mode is set to "Manual" mode, the user needs to connect 4G / 3G / 2G networks manually at the UI software Homepage. After the 4G / 3G / 2G network connection is successful, the management web page displays the network connection traffic. Notes：Set "Automatic", "Manual" mode at "external network connection settings ‐> Connection Mode" menu of UI software, by defaults is "Auto" mode. 5.
Carfi S100 User Manual of preferred networks, remove preferred network corresponding to the hotspot, search again after OK. 4.5 WLAN Internet connection speed is unstable or too low 1. Poor network signal, please move to another place with good signal. 2. Network is busy at the moment, use when it is available. The network is busy at the moment, use it when it is available. 4.6 Wireless devices cannot make WLAN business. 1. WLAN is not connected or connection failure.
Carfi S100 User Manual FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
