User's Manual

ManualsBrandsPayRange ManualsElectronicsPayrange BluKey Pro

PayRange|BluKeyPro|UserManual

Page1|23

PayRangeBluKeyPro™

ProductInformation

Models:

 BluKeyPro™18cdr|18‐pin|Card

 BluKeyPro™12cd |12‐pin|Card

 BluKeyPro™12d |12‐pin



Contents

Introduction..................................................................................................................................................2

Interfaces......................................................................................................................................................2

Installation....................................................................................................................................................2

Introduction...................................................................................................Error!Bookmarknotdefined.

BeforeInstallation.........................................................................................................................................4

BluKeyProMachineHarnessSelectionGuide..............................................................................................5

InstallationSteps...........................................................................................................................................6

MachineControllerProgramming................................................................................................................7

BluKeyProDeviceConfiguration..................................................................................................................8

CardReaderHarnessesReference..............................................................................................................11

Troubleshooting/LightCodes....................................................................................................................11

RegulatoryApproval&Warnings...............................................................................................................14

ContactingPayRangeSupport....................................................................................................................14

AppendixA:PriceSetup..............................................................................................................................16

AppendixB:BluKeyProFirmwareUpgrade...............................................................................................17

AppendixC:SplicingWires..........................................................................................................................17

AppendixD:Specifications..........................................................................................................................19

DocumentHistory.......................................................................................................................................22

The linked image canno t be display ed. The file may h ave been mov ed, ren amed, or deleted. Ver ify th at the link poin ts to the c orrect file and lo cation.

Summary of content (23 pages)

PAGE 1
PayRange | BluKey Pro | User Manual PayRange BluKey Pro™ Product Information Models:  BluKey Pro™ 18cdr | 18‐pin | Card  BluKey Pro™ 12cd | 12‐pin | Card  BluKey Pro™ 12d | 12‐pin The link ed image cannot be display ed. The file may hav e been mov ed, renamed, or deleted. Verify that the link points to the correct file and location. Contents Introduction ...............................................................................................................................................
PAGE 2
PayRange | BluKey Pro | User Manual Introduction The turnkey PayRange payment system includes a BluKey hardware device for the machine along with a mobile app and transaction processing service for the customer. Consumers maintain a prepaid balance on their smartphones and use it to make payments at a variety of machines that can include vending, amusement, parking, transit ticketing, and laundry equipment.
PAGE 3
PayRange | BluKey Pro | User Manual PayRange Mobile Payment System PayRange Mobile Payment System consists of:    BluKey Pro™ (accepts payments from PayRange mobile app) Cable Harness (connects BluKey Pro to Laundry Machines) Optional Card Harness (connects BluKey Pro to Card reader installed in the Laundry Machine) Laundry Machine Machine Coin Acceptor and Card Readers Cable Harness BluKey Pro™ P a g e 3 | 23
PAGE 4
PayRange | BluKey Pro | User Manual Before Installation 1. Create your PayRange Operator Account a. b. c. d. Go to http://manage.payrange.com. Sign up for a customer account. If you already have a customer account, Sign in. Once logged in, click Create an Operator Account (may need to click Account first). Select Operator Sign up (at the bottom of the page), follow prompts to create your account. e. Setup ACH for payment with your bank routing and account number.
PAGE 5
PayRange | BluKey Pro | User Manual BluKey Pro Machine Harness Selection Guide There are many brands and models of laundry machines. This document contains only brief information on how to select harness appropriate for a given laundry machine. PayRange sales team has more advanced tools and can decode machine information from full model and serial numbers and advise required harnesses and installation instructions.
PAGE 6
PayRange | BluKey Pro | User Manual  4‐pin connector is not used (no card reader) ‐ Use C4/D4 harness  4‐pin connector is used (machine has card reader) o Pulse mode: Use C7/D7 harness if coin slot is not installed, and C8/D8 harness if coin slot is installed. Harness power connector will have to be cut off and wires spliced to machine 24VAC power. o Serial mode: NetMaster not supported in pulse mode. 2. Maytag and Some Whirlpool Machines a.
PAGE 7
PayRange | BluKey Pro | User Manual 4. Connect Coin Acceptor connectors: a. Disconnect machine’s Coin Acceptor harness connector (if present) b. Plug in pass‐through Coin Acceptor connectors into Coin Acceptor connector and machine’s harness connector If Coin Acceptor is not present on the machine but machine has Coin Acceptor harness, plug in only one connector. Coin Acceptor is not required for BKPro operation. 5. Power up the machine (leave the control panel open) 6.
PAGE 8
PayRange | BluKey Pro | User Manual 1. Using Coin Inputs For harnesses connecting to coin inputs and using pulse mode (e.g. C7/L7 and C8/L8) – if machine has Coin Acceptor connector, but Coin Acceptor is not installed, enable Coin Acceptor input to receive mobile payments. Follow these steps: a. b. c. d. e.
PAGE 9
PayRange | BluKey Pro | User Manual b. c. d. e. f. g. Click DEVICES > Register in the left panel Enter device Serial number and Pin (from BluKey Pro back label) Enter Display name (it will be shown in the app to customers) Enter other relevant information (location name, address, etc.) Take a picture of the machine and upload to the “Picture” field If there is a PayRange decal for the machine, attach the decal to the machine. If there is scan to pay QR code, enter Scan to Pay number from the decal h.
PAGE 10
PayRange | BluKey Pro | User Manual f. Set Pulse on: / Pulse off: to match Bill Acceptor timings required for the machine controller (see machine documentation) g. Add Credits/Pulse/Amount in “Configure Multi Credit” section (match machine prices) h. Configure harness: Select harness from the list, enter money values for cash counter pulses, review options for each signal (click “edit” icon on the right). i.
PAGE 11
PayRange | BluKey Pro | User Manual Card Reader Harnesses Reference Card Reader Harnesses Summary Name Part Number Description R1 11.01213‐xx DIY R2 11.01214‐xx Heartland 8‐pin R3 11.01215‐xx Greenwald 8‐pin R4 11.01216‐xx KioSoft 10‐pin R1 | 11.01213‐00 | DIY Card Reader Harness R1 harness supports any card reader, but it requires customer to splice wires into existing card reader connector. R2 | 11.
PAGE 12
PayRange | BluKey Pro | User Manual BKPro LED is solid red BluKey Pro is in wrong mode Contact PayRange for support BKPro LED slowly flashes red Machine is not accepting payments Refer to machine manual to enable payments / return to enabled state. Machine is in use Wait for machine to complete its cycle.
PAGE 13
PayRange | BluKey Pro | User Manual during cycle Machine does not accept coins for the harness in Manage (see section “Machine Controller Programming”). 1. Check if machine accepts coins if BluKey Pro harness is disconnected from the machine’s coin harness (can disconnect harness from BluKey Pro). If not, replace coin acceptor and its harness. 2. Check machine’s wiring (a loose wire in connector pin could be causing coin sensor/switch disconnects). 3.
PAGE 14
PayRange | BluKey Pro | User Manual Regulatory Approval & Warnings Modification statement PayRange has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. United States This device complies with Part 15 of the FCC Rules.
PAGE 15
PayRange | BluKey Pro | User Manual 1. For Technical Support: 2. For Sales and Marketing Support: Phone: +1 (855) 856‐6398 (menu option 1) Phone: +1 (855) 856‐6398 (menu option 2) Email: support@payrange.com Email: sales@payrange.
PAGE 16
PayRange | BluKey Pro | User Manual Appendix A: Price Setup When you register or edit the device, you can also set up the price. Here are some guidelines: • Price per credit is the total price to play the machine • Cash value per pulse is how much money each pulse is worth • Pulses per credit is how many pulses it takes to get to the total price  Pulse on (ms) and Pulse off (ms) is the length of the pulse for the particular machine.
PAGE 17
PayRange | BluKey Pro | User Manual Appendix B: BluKey Pro Firmware Upgrade PayRange may release firmware updates with new functionality and improvements. BKPro firmware is upgraded automatically, in the background. Contact PayRange support for additional information on firmware upgrades. Appendix C: Splicing Wires On some machines power has to be taken from machine’s wiring harness or credit wires have to be spliced to coin switch wiring harness. Use the following procedure to splice wires. 1.
PAGE 18
PayRange | BluKey Pro | User Manual The link ed image cannot be display ed. The file may hav e been mov ed, renamed, or deleted. Verify that the link points to the correct file and location. Insert one of the wires from BluKey Pro harness into the stopped opening of the splice until it hits the end of the opening. You may need to clip the wire from harness connector that is not going to be used. You should be able to see the wire in the window by the metal brace. The link ed image cannot be display ed.
PAGE 19
PayRange | BluKey Pro | User Manual Appendix D: Specifications 2. BluKey Pro Models Model Part Number BluKey Pro 18cdr BluKey Pro 12cd BluKey Pro 12d 10.01261 10.01265 10.01267 MACHINE Connector 18 pins 12 pins 12 pins CARD Conn. ● ● Notes Model CARD Coin1 Coin2 Relay External Internal Mnemonic Notes Suffix Conn.
PAGE 20
PayRange | BluKey Pro | User Manual 4. Operating Conditions Symbol Description Min Typ Max Unit TO Operating temperature range ‐30 ‐ 85 °C VCC AC1/GND Power supply, DC 9 12 50 VDC VCC AC1/AC2 Power supply, AC (rms) 16 24 29 VAC ICC Power supply current, max (@ 9VDC or 16VAC) ‐ ‐ 575 mA UCC Power consumption ‐ ‐ 3.8 W (1) VDDO 5V_OUT power supply output, DC ‐ +5.0 ‐ V VDDI 5V_IN power supply input, DC +1.65 +5 +5.
PAGE 21
PayRange | BluKey Pro | User Manual 6. RF Specifications Symbol Description Min. Max. Unit FRF RF Frequency range (Bluetooth 4.1) 2402 2483.5 MHz PRFO RF Output power +9 dBm SRFI RF Sensitivity (at 0.1% BER) GRF Antenna Gain ‐93 Notes dBm 3.0 dBi 7. Connector Pinouts MACHINE Connector Pinout BKPro MACHINE connector is either 12‐pin JST S12B‐PUDSS or 18‐pin JST S18B‐PUDSS.
PAGE 22
PayRange | BluKey Pro | User Manual 3 IN1 Auxiliary input 4 AC2 Power supply output 5 AC1 Power supply output 6 RXD Serial RX Data input 7 GND Common for all signals 8 5V_IN 5V DC Input 9 OUT1 Auxiliary output 10 OUT2 Auxiliary output Notes:      Direction of input and output is given from BKPro’s perspective. GND is common for 5V_IN, DC_OUT and all inputs and outputs. Power supply output is passed from MACHINE connector AC1/AC2 pins, can be AC or DC.
PAGE 23
PayRange | BluKey Pro | User Manual P a g e 23 | 23