User Manual

ManualsBrandsPaxton Access ManualsElectronics125 kHz Proximity Reader

Ins-30045-US PROXIMITY marine reader

06/07/2007

Technical Support

Technical help is available: Monday - Friday from 5am - 5pm PST / 8am - 8pm EST

Other documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/

1 800 672 PAXT support@paxton-access.co.uk

Fitting

Fix the back plate to the wall with the stainlesss steel screws provided in the tting kit. The small slot in the plate

edge should be positioned at the bottom.

Where the reader is to be tted to a smooth surface, bulkhead, etc. a gasket is supplied to provide a weatherproof

seal between the back plate and the mounting surface. (The reader has its own integral seal)

Locate the reader in the keyhole slots provided in the back plate. Make sure that the locking pin is close to the slot

in the edge of the back plate. Rotate the reader clockwise until the locking pin engages in the slot.

To remove the reader, insert a small screwdriver into the cut out provided and use it to lift the locking pin. The

reader can then be rotated anticlockwise to release it from the back plate.

Summary of content (4 pages)

PAGE 1
06/07/2007 Ins-30045-US PROXIMITY marine reader Technical Support 1 800 672 PAXT support@paxton-access.co.uk Technical help is available: Monday - Friday from 5am - 5pm PST / 8am - 8pm EST Other documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/ Fitting Fix the back plate to the wall with the stainlesss steel screws provided in the fitting kit. The small slot in the plate edge should be positioned at the bottom.
PAGE 2
Wiring Power Relay 1 Relay 2 CAUTION: for 12v d.c. readers only. For correct connection of old 5v readers, refer to instructions. Brown Red 0v Inputs Exit 0v PSU 5v 12v OK PSU Exit Tx Rx Tamper Orange Contact 4 0v Contact Tamper Relay 2 White/Orange Relay 1 Green N.O. Com Alarm Output Network 2 3 CAT5 cable coding White/Green N.O. Com 4 Screen or spare cores from network cable 1 0v N.C. 24898 00000 Orange +12v N.C.
PAGE 3
Frequently asked questions Here is the list of topics about this product that receive the most technical support enquiries. We list them here to help you speed up the installation and trouble shooting process. 1 - Readers/Keypads not working . Software settings - Confirm that the settings of the reader or keypad are correct. . Connections - Check the wiring and integrity of reader/keypad terminal connections. .
PAGE 4
Specifications Environment Operating temperatures - all items Min -25 °C (-4 °F) Max +55 °C (+131°F) Waterproof IPX7 5 yards Cable length Electrical Voltage Min 8v DC Current Max 14v DC 130 mA 125 kHz Carrier frequency 600 µs Clock and data bit period Read Range Dimensions Token Keyfob Hands Free Token 1 1/2” 1” 15” Diameter Depth 4” 5/8” The declaration of conformity may be consulted at - http://paxton.info/596 FCC Compliance This device complies with Part 15 of the FCC Rules.