User's Manual

ManualsBrandsPaxton Access ManualsElectronics125 kHz Proximity Reader

Ins-30040-US PROXIMITY architectural reader

06/07/2007

Technical Support

Technical help is available: Monday - Friday from 5am - 5pm PST / 8am - 8pm EST

Other documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/

1 800 672 PAXT support@paxton-access.co.uk

Fitting

Mount the reader back box ush into the wall. Care must be taken when doing this, as there is no further

adjustment possible within the box. Screws and plugs are provided for tting the unit to the wall.

Line up the two locating pins on the top of the reader with the top plate inside the back box. Once located, the

reader can be clipped into the box at the bottom using the clip feature.

Check that the reader is located against the surface of the wall. If there is a gap between the reader and the wall,

or if the reader will not successfully clip into the box, remove the reader and adjust the mounting plates inside the

back box using a 3mm Allen key.

To remove the reader, insert the tool provided into the cut out on the underside of the reader. Push up the clip

and pull the reader from the back box.

Summary of content (4 pages)

PAGE 1
06/07/2007 Ins-30040-US PROXIMITY architectural reader Technical Support 1 800 672 PAXT support@paxton-access.co.uk Technical help is available: Monday - Friday from 5am - 5pm PST / 8am - 8pm EST Other documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/ Fitting Mount the reader back box flush into the wall. Care must be taken when doing this, as there is no further adjustment possible within the box.
PAGE 2
Wiring Red Power Relay 1 Relay 2 N.C. 3 CAUTION: for 12v d.c. readers only. For correct connection of old 5v readers, refer to instructions. N.O. Com N.O. 24898 00000 Com Alarm Output 0v Contact Inputs 4 0v Exit 0v PSU 12v 5v OK 2 PSU Exit Tx Rx Tamper Orange Contact 4 0v Tamper Relay 2 White/Orange Relay 1 Green +12v N.C.
PAGE 3
Frequently asked questions Here is the list of topics about this product that receive the most technical support enquiries. We list them here to help you speed up the installation and trouble shooting process. 1 - Readers/Keypads not working . Software settings - Confirm that the settings of the reader or keypad are correct. . Connections - Check the wiring and integrity of reader/keypad terminal connections. .
PAGE 4
Specifications Environment Operating temperatures - all items Min Max -20 °C (-4 °F) +55 °C (+131 °F) IPX7 Waterproof 5 yards Cable length Electrical Voltage Min Max 8v DC 14v DC 60 mA Current Carrier frequency 125 kHz 600 µs Clock and data bit period Dimensions Width 2 Backbox 2 3/8” 4” 1” Token Keyfob Hands Free Token 1” 15” 1 1/2” 4 3/8” Depth Reader Read Range 3/4” Height 3/8” The declaration of conformity may be consulted at - http://paxton.