User's Manual

ManualsBrandsPaxton Access ManualsElectronicsPROXIMITY P50M HID READER

PAGE 1

Ins-40158-US PROXIMITY P50M HID

reader - UL

Mounting

Technical Support

Technical help is available: Monday - Friday from 02:00 AM - 8:00 PM (EST)

1.800.672.7298 support@paxton-access.com

Documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/

Paxton

Readers mounted together

between readers

12 inches

Suitability

Security sensitive doors

Wet environments

06/08/2011

Summary of content (4 pages)

PAGE 1
06/08/2011 Paxton Ins-40158-US PROXIMITY P50M HIDTM reader - UL Technical Support 1.800.672.7298 Technical help is available: support@paxton-access.com Monday - Friday from 02:00 AM - 8:00 PM (EST) Documentation on all Paxton products can be found on our web site - http://www.paxton-access.
PAGE 2
Wiring +12V DC Red LED Amber LED Green LED Data/data0 Clock/data1 Not required 0V Connection to a control unit reader port Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes, and the authorities having jurisdiction. Token type and configuration The reader will recognise 125kHz proximity tokens in HID format to produce a Wiegand output (26 to 50 bit) or EM4100 tokens to produce an ABA Track2 Clock and Data output.
PAGE 3
Parts List Part 345-220-US Fitting Kit Description PROXIMITY P50M HID reader TM (5) Cable clips (3) No. 6 x 3/4 woodscrew - zinc (3) Wall plugs 22mm (1) 8mm x 3mm pan head self tapping screw - zinc (2) Backbox screws Unit installation / test When choosing a location for the reader, ensure that it is at least 12 inches from other readers. This will include readers mounted on the other side of the same wall as the radio signal will cause interference and reduce the read range.
PAGE 4
Technical Help Here is the list of topics about this product that receive the most technical support inquiries. We list them here to help you speed up the installation and trouble shooting process. 1 - Readers/Keypads not working. Q- Software settings - Confirm that the settings of the reader or keypad are correct. Q- Connections - Check the wiring and integrity of the connectors. If possible, test this reader on the other port.