L920Pro-BE Wireless Base PAX TECHNOLOGY LIMITED
1. Contents Checklist Please check the components after unpacking. If any one of them is missing, or if there is a page missing from the product manual, etc., please contact the dealer. Name L920Pro-BE Product manual 2. Product Description Qty.
The matching diagram for A920Pro host and L920Pro wireless base is as follows: 3. Installation 1) Connect the base's Power port with the power adapter. 2) Connect the base's RS232 port with the cash register's serial port. (When you do this step, skip step 3.) 3) Connect the base's USB Slave port with the cash register's USB port.(When you do this step, skip step 2.) 4) According to the requirements, connect the base's LAN port with the gateway device, such as router, LAN switch. (This step is optional.
Reset Button: Restore factory settings Status Light: Power, WIFI, Bluetooth, Ethernet Port Instruction: Type-C USB x 1: Power port RS-232 x 1: RJ45-8P8C Type-C USB x 1: USB2.0 Device port Type-A USB x 1: USB2.0 Host port, used for connecting the scanner gun or keyboard. Ethernet x 1: RJ45-8P8C Working Environment: Temperature:0°C~40°C(32°F ~104°F) R.H.: 10%~93%( non-condense) Storage Environment: Temperature:-20°C~70°C(-4°F ~158°F) R.H.: 5%~95%( non-condense) 6.
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
ISED RF Exposure Statement This device complies with ISED RSS-102 RF exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the IC RSS-102 RF exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. Cet appareil est conforme aux limites d'exposition aux rayonnements de la CNR-102 définies pour un environnement non contrôlé.