D180 mPOS Terminal PAX TECHNOLOGY LIMITED
1.Product Description Figure 1. Front view 1. Charging LED indicator 2. Power key 3. Magnetic stripe card reader 4. Display 5. Smart card reader 6.
Figure 2. Back view 7. MicroUSB Connector 8. Bluetooth MAC address Bar code lable 9. Manufacture Lable 10. Serial Number Lable 11. Charing Contacts 12. Mouning Slots(4) 2.Quick Start Connect to PC with USB cable 1) 2) 3) 4) 5) 6) Connect PC with D180 by USB cable. Shopping and click PAY button on PC. Confirm amount displayed on D180 screen. Prompt for reading card on D180. Input PIN through pinpad of D180. Finish the transaction.
Connect mobile equipment through Bluetooth 1) Turn on Bluetooth of the mobile equipment and scan for D180. By default, the device name of D180 is PAX D180_XXXX, and XXXX are the last 4 letters of the Bluetooth MAC address of D180, please notice that the device name may be modified according to user requirement. 2) Pair the mobile equipment with D180, during the progress, the mobile equipment may prompt for confirming pairing passkey, click OK to confirm.
Swiping magnetic stripe card Figure 3.Swipe magnetic stripe card When swiping, the backside of the card must be faced up as shown in Figure 3. Bi-directional swiping is supported. Pleas swipe the card with a constant speed.
Reading smart card Figure 4. Insert smart card When inserting smart card into its slot, the chip of smart card must be faced up. In order to avoid any physical damage to the card or the smart card slot of the terminal, it is recommended to insert the card gently. If smart card is successfully detected by the terminal, the icon of the smart card will be shown on the top of screen. ICC Operation Process Before inserting the IC card, please check inside and around the IC card slot.
Solid green when the USB cable is connected and the battery is fully charged. 4.Specifications CPU: Memory: Display: Keyboard: MSR Reader: 32-bit secure processor 1MB Flash，128KB SRAM，External: 8M independent space 128*64, 1.69’ LCD 10 numeric keys 3 soft-function keys 1 power key Encryption transmission, track l/2/3, bi-directional Smart Card Reader: 1 User card (EMV 4.3) Optional Contactless card reader Communication: USB 2.0 Optional, Bluetooth 2.1+EDR/BT4.0+LE Peripheral Ports: 1 USB 2.
FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
une telle interférence ne peut pas être éliminée. D180 n'a pas approuvé les changements ou modifications apportés à cet appareil par l'usager. Tous les changements ou modifications apportés peuvent entraîner la révocation de l'autorisation d'utilisation de l'appareil. RF Exposure Information This device meets the government’s requirements for exposure to radio waves.
