ASSEMBLY INSTRUCTIONS 1-Piece Deck Box Contact us via email: hofficeservice@gmail.com for more information.
Parts 1. Gather and organize all required parts prior to assembly. 2. Assemble on a flat, clean and soft surface. 3. Two or more people are needed for the assembly. 4. Align the holes before assembly and snap into place with a slight tap. 5. Please prepare rubber mallet in advance for convenient installation. 6. The product’s structure prevents it from being conveniently assembled in low temperatures, so do not intentionally install at low temperatures. 7.
Parts Item no. Qty. Item no. 1 X6 8 X1 2 X12 9 X1 4 X1 10 X18+ 1extra 5 7 Reference Image X1 11 X1 12 2 Reference Image M8X20mm M5X16mm M4X8mm Qty.
Assembly steps Exploded View A E H F G B 3 C D
Assembly steps Step 1 B (X1) 8 12 H (X1) H ⑧ (X1) 12 (X3) H 3 B 2 B Note: The triangularly marked spots on parts B and H should be on the same side. 4 H 1 Insert part H into part B’s slot first, then make sure it can slide backward to the full extent.
Assembly steps Step 2 F (X1) H F 2 1 B Insert parts F into part B’s slots first, then make sure it can slide right to the full extent.
Assembly steps Step 3 E (X1) H F E 2 B 1 Insert parts E into part B’s slots first, then make sure it can slide right to the full extent.
Assembly steps Step 4 G (X1) E F H G B 2 1 Follow the above step for parts G and B.
Assembly steps Step 5 ⑩ (X18) G E F H B 10 8
Assembly steps Step 6 C (X1) ① (X2) ② (X2) 11 (X4) C 2 1 11 Note that part ① (hinge) has two sides that differ in width. Before fixing the installation position, either side can be selected to ensure that all hinges installed use the same side width.
Assembly steps Step 7 D (X1) ① (X2) ② (X2) ⑤ (X1) ⑦ (X1) 11 (X4) 12 4 D 5 D 11 2 1 (X6) 12 12 7 ④ (X1) D Note that part ① (hinge) has two sides that differ in width. Before fixing the installation position, either side can be selected to ensure that all hinges installed use the same side width.
Assembly steps Step 8 ② (X4) 11 (X8) F E G H B C D 2 11 11
Assembly steps Step 9 1 2 A (X1) ① (X2) ⑨ (X1) 11 A 11 ② (X2) (X4) 12 (X3) Note that part ① (hinge) has two sides that differ in width. Before fixing the installation position, either side can be selected to ensure that all hinges installed use the same side width.
Assembly steps Step 10 ② (X2) 11 (X4) A H F E G B C 2 11 13 H D
Assembly steps Step 11 Unlocked State Locked State 14 Installation Completed