MANUAL
PathSpot Hand Scanner Model: A3441W03 Rated: 12V, 2A Max ASTM STANDARDS FCC ID: 2AVFWA3441W03 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmfulinterferencewhen theequipmentis operated inacommercialenvironment.
Table of Contents 1. Getting Started 2. Training & Supporting Your Team 3. Notifications & Reports 4. Hand Scanner Settings 5. Common Questions 6. Troubleshooting 7. Contact PathSpot Support 2 Reach PathSpot Support at support@pathspottech.
1. Getting Started Your PathSpot HandScanneris designedto helpyour team achieve your handwashing goals and protect from the threat of foodborne illness! To get started, follow thestepsoutlinedinyourinstallationguidetosecure the device to the wall. Before your Hand Scanner is ready to collect data, you must first connect it to your WiFi network. Follow the instructions below to finish setup: Connecting Hand Scanner to WiFi 1. Tap the WiFi icon to view available networks 2.
Congratulations! You are ready to use the PathSpot Hand Scanner to protect your team and guests from the threat of foodborne illness. 2. Training & Supporting Your Team Includedwithyour PathSpot HandScanneraresigns that you can use to draw attention to this new technology and help your team understand how to use it. You will also find video content and other resources at pathspottech.com/resources to support you in introducing the PathSpot Hand Scanners to your team members.
How Often to Use the Hand Scanner You should scan every time you wash your hands to confirm your hands are safe to handle food. What the Hand Scanner Detects ThePathSpotHandScannerlooksforspecificsignsof dangerous bacteria and viruses that could cause foodborneillnesssuchasE-Coli,Norovirus, Salmonella, Listeria, and Hepatitis A. The PathSpot Hand Scanner is not designed to detect dirt, germs, food scraps or other contaminants.
TipsforHelpingyourTeamDevelopaHandScanning Routine Here are a few strategies to help your team develop a hand scanning habit after every hand wash: ● Working with shift managers to provide daily reminders during the first month of scanning ● Reminding shift managers to set an example by scanningconsistently every time they wash their hands ● Requiring each team member to scan at the beginning of each shift ● Movinggloveboxesandpapertoweldisposal station next to the Hand Scanner to encourage scanning
Weekly Data Reports PathSpot Support will also email your location’s email addresswithweekly datareportstohighlight trends and patterns in handwashing practices. PathSpot provides transparency to support your team in followingyour organization’sbest practicesby tracking the number of hand scans and the effectiveness of each wash. 4. Hand Scanner Settings On the screen of the Hand Scanner, you will see a settings icon in the upper righthand corner.
5. Common Questions DoesituseUV No,the light isnot dangerous. The color of rays that the light used during the scan is in the visible could be spectrum. The PathSpot Hand Scanner is not dangerous? a UV light. Whydid I pass The PathSpot Hand Scanner looks for specific thescanifmy invisible indicators of dangerous foodborne hands are illness contaminants that can lead to ‘dirty’? foodborne illness such as Salmonella, Norovirus, E. Coli, and Hepatitis A.
How does the The PathSpot Hand Scanner uses a technology technology called “visible light fluorescent work? spectroscopy” to detect invisible indicators of dangerous foodborne illness contaminants that cause foodborne illnesses such as E-Coli, Norovirus, Salmonella, Listeria, and Hepatitis A. It measures the reflection of light off your hands to determine whether or not a set of proprietary markers are present.
How do I see Tap the settings icon in the top right corner of which team thePathSpot screen. You willsee “Manage members Employees”listedatthetopoftheSettings have screen. Tap “Manage Employees” to display a registered as list of all the users who registered on this new users and Hand Scanner. which have not? If my location No.Ifateammemberhasregisteredatone has more than of your store’s Hand Scanners, then they can one Hand scan at any of your location’s devices.
6. Troubleshooting If the PathSpot team notices an issue with your Hand Scanner,you willreceiveanemail fromPathSpot Support at support@pathspottech.com. Hand TheHand Scanner will automatically turn off Scanner is when unplugged. Confirm the device is unplugged plugged into the wall and into the device by testing if the lights turn on by placing hands beneath the device. Once plugged in, wait for the device screen to turn on.
the device to turn it on. If it still does not turn on, contact support@pathspottech.com. Screen does The PathSpot screen is a tablet, and the not display PathSpot software runs on an app on the PathSpot tablet.Ifthescreenexitstheapp,tapthe screen PathSpot icon present on the device’s home screento relaunchthe PathSpot screen. The light If the light under the Hand Scanner does not under the turn on during scans, the device may be Hand unplugged.