User's Manual

ManualsBrandsPaten Wireless Technology ManualsComputers & Accessories2.4G WIRELESS TRAVEL MOUSE

Genel Bakýþ

a. Pil göstergesi

b. Kaydýrýcý

c. Sol týklatma düðmesi

d. Sað týklatma düðmesi

e. USB Baðlayýcýsý

f. Connect düðmesi

1. Pillerin Takýlmasý

Connect düðmesi

2. Creative RF Receiver’ýn Baðlanmasý

Windows 98/98 SE için:

Creative Mouse Wireless Notebook Optical’ý baðlarken normal farenizi çýkarmayýn.

USB baðlantýsýný bilgisayarýnýzýn USB baðlantý noktasýna takýn.

3. Creative Mouse Wireless Notebook Optical’ýn Etkinleþtirilmesi

Kullanmadýðýnýz zaman fareyi kapatarak pilin boþa harcanmasýný önleyin.

Fareniz belirli bir süre kullanýlmadýðýnda da güç tasarruf moduna geçer.

Fareyi ilk kez baðlarken ve pilleri deðiþtirdikten sonra, adým 2 ve 3’ü

tekrarlayarak aygýt bilgilerini deðiþtirin.

Farenin üzerindeki Connect düðmesine, RF Receiver üzerindeki Connect

düðmesine bastýktan sonra 10 saniye içinde bastýðýnýzdan emin olun.

2. RF Receiver üzerindeki Connect düðmesine, gösterildiði gibi basýn.

3. Fare üzerindeki Connect düðmesine, gösterildiði gibi basýn.

4. Fareyi test edin. Yanýt vermezse, adým 2 ve 3’ü yeniden deneyin.

Farenizi açmak için:

1. Düðmeyi þekildeki gibi AÇIK konumuna getirin.

Creative Bilgi Tabaný

Teknik sorunlarýnýzý Creative’in 24 saat hizmet veren otomatik yardýmlý Bilgi Tabanýnda çözün.

www.creative.com adresine gidin ve bölgenizi seçin.

4. Creative Mouse Wireless Notebook Optical’ý yükleme

Windows XP/2000/Me için:

Creative Mouse Wireless Notebook Optical’ý baðladýktan sonra, Windows fareyi

otomatik olarak algýlar ve gerekli sürücüleri yükler.

Windows USB aygýtýný algýladýðýnda, Windows 98 ve 98 SE kullanýcýlarý, Yeni

Donaným Ekleme Sihirbazý iletiþim kutusu ile karþýlaþabilir. Ekrandaki

yönergeleri izleyin. Yükleme sýrasýnda, Windows Yükleme CD’sini CD-ROM

sürücüsüne yerleþtirmeniz istenebilir. Bazý bilgisayarlar Windows CD’si ile

saðlanmamýþ olabilir fakat gerekli dosyalar c:\windows\options\cabs

(Windows’un yüklü olduðu sürücü etiketine baðlý olarak, c:\ harfini deðiþtirin)

dizininde bulunur.

Visão Geral

a. Indicador de bateria

b. Roda de rolagem

c. Botão esquerdo do mouse

d. Botão direito do mouse

e. Conector USB

f. Botão Conectar

1. Inserindo as baterias

2. Conectando o receptor Creative RF

Para o Windows 98/98 SE:

Não desconecte o mouse original quando instalar o Creative Mouse Wireless

Notebook Optical.

Conecte o conector USB à porta USB do seu computador.

3. Ativando o Creative Mouse Wireless Notebook Optical

Knowledge Base da Creative

Resolva e pesquise dúvidas técnicas no Knowledge Base 24 horas de auto-ajuda da

Creative. Vá para http://www.creative.com e selecione a sua região.

4. Instalando o Creative Mouse Wireless Notebook Optical

Para o Windows XP/2000/Me:

Após conectar o Creative Mouse Wireless Notebook Optical, o Windows detectará

o mouse e instalará automaticamente os drivers necessários.

Os usuários do Windows 98 e 98 SE poderão visualizar uma caixa de

diálogo do Assistente para Adicionar Novo Hardware quando o Windows

detectar seu dispositivo USB. Siga as instruções na tela. Poderá ser

necessário inserir o CD de Instalação do Windows na unidade de CD-ROM

durante a instalação. Alguns computadores poderão não vir acompanhados

do CD do Windows, porém os arquivos necessários estarão armazenados

em c:\windows\options\cabs (substitua c:\ pela letra da unidade onde o

Windows estiver instalado).

Botão Conectar

Para ativar o mouse:

1. Passe o interruptor para a posição ON conforme mostrado.

Economize a bateria, desligando o mouse quando não estiver em uso.

O mouse entrará no modo econômico, após um período de inatividade.

2. Pressione o botão Conectar no receptor RF, conforme mostrado.

3. Pressione o botão Conectar no mouse, conforme mostrado.

4. Teste o mouse. Caso não responda, repita as etapas 2 e 3 novamente.

Repita as etapas 2 e 3 para alterar as IDs do dispositivo, ao conectar o

mouse pela primeira vez e após a troca de baterias.

Pressione o botão Conectar do mouse dentro de 10 segundos após

pressionar o botão Conectar no receptor RF.

OPEN

EJECT

Overview

FreePoint

Travel Mini Mouse

a. Low-battery

indicator

b. Scroll wheel

1. Inserting Batteries

2. Charging Batteries (Optional)

If you use non-rechargeable alkaline batteries, skip this step and proceed to

Step 3 Connecting the RF Receiver. DO NOT attempt to charge non-rechargeable

alkaline batteries. The batteries may leak and damage your mouse.

3. Connecting the RF Receiver

2. Remove the RF Receiver.

Resolve and troubleshoot technical queries

at Creative's 24-hour self-help Knowledge Base.

Go to www.creative.com and select your region.

Creative Knowledge Base

e. Right-click button

c. Left-click button

d. Charging port

i. USB connector

f. Optical sensor

g. USB slot

h. Battery compartment

Frequently Asked Questions

4. Storing Your Travel Mouse

More Information

1. Insert the RF Receiver into the USB

slot.

My mouse seems to be experiencing interference. Is there anything I can do?

You can reset your mouse. Press the RESET button on your mouse as shown.

Your mouse turns off when the RF Receiver is fully inserted. Conserve battery

power by turning off your mouse when it is not in use.

2. Rotate and press the RF Receiver as

shown.

The EJECT button clicks and the RF

Receiver is held in place for

convenient storage.

1. Press the EJECT button at the back of

your mouse.

The RF Receiver is released and the

red Optical sensor lights up to

indicate that the mouse is turned on.

Enjoy a host of benefits by registering your product during installation, or at

www.creative.com/register. Benefits include:

• Service and product support from Creative

• Exclusive updates on promotions and events

Please note that your warranty rights are not dependent on product registration.

3. Connect the RF Receiver to an available USB port on your computer.

You can start using your mouse.

For Windows 98 SE:

Users may be prompted by an Add New Hardware Wizard dialog box when

Windows detects the USB device. Make sure the original mouse is connected and

follow the instructions on the screen. You may need to insert the Windows

Installation CD into the CD-ROM drive. Some computers may be supplied without

the Windows CD, but have the necessary files stored in c:\windows\options\cabs

(replace c:\ with the drive letter your Windows has been installed on).

For Windows XP/2000/Me:

After you have connected the USB device, Windows will detect the USB device and

install the required drivers automatically.

Keep your mouse connected to the USB port

on your computer, and proceed to Step 3

Connecting the RF Receiver to:

• Use your mouse and charge the batteries at

the same time.

• Use your mouse without batteries.

EJECT

EJE

+ AAA Battery -

OPEN

EJECT

OPEN

EJE

OPEN

EJECT

OPEN

EJECT

OPEN

EJECT

1. Connect the USB charging cable to the USB port on your computer and the

Charging port on your mouse as shown.

2. Fully charge the batteries for about four hours (initial charge: eight hours).

3. Disconnect the mouse from the charging cable.

When the Low-battery indicator blinks in red, repeat steps 1 and 2 to charge the batteries.

Your mouse is supplied with two rechargeable AAA batteries.

DO NOT mix batteries of different brands and capacities.

registered trademarks of Creative Technology Ltd. in the United States and/or other countries. Microsoft, Windows

and the Windows logo are registered trademarks of Microsoft Corporation. All other products are trademarks or

registered trademarks of their respective owners and are hereby recognized as such. All specifications are subject to

change without prior notice. Actual contents may differ slightly from those pictured.

PN 0300000000307 Rev.A

Quick Start

Summary of content (2 pages)

PAGE 1
FreePoint Travel Mini Mouse TM Overview a. Low-battery indicator 3. Connecting the RF Receiver b. Scroll wheel f. Optical sensor i. USB connector g. USB slot 1. Press the EJECT button at the back of your mouse. 4. Storing Your Travel Mouse 2. Remove the RF Receiver. 2. Rotate and press the RF Receiver as shown. 1. Insert the RF Receiver into the USB slot. The RF Receiver is released and the red Optical sensor lights up to indicate that the mouse is turned on.
PAGE 2
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.