User Manual

Getting started with the Midiblock

Receiving MIDI messages in the Patchblock

Connect the Midiblock to the left side of the Patchblock and move the switch to the “MIDI IN” position.

Make sure you switch on the Patchblock after you connected the Midiblock, otherwise digital glitches

can occur that might trigger a Note-On message which gets stuck.

Now you can connect a Midi-Keyboard or the Midi-Interface of your computer to the Midiblock and

send MIDI messages into the Patchblock. Below are two examples of simple MIDI patches.

MIDI IN MIDI OUT

Monophonic Synth

Copy and paste this code into your Patchblocks editor

Polyphonic Synth

AAUAAADveJw9jk0KwkAMhV/t1KkgiDfoCaTTf+hK0EUXVc+gnUKh2IHOCK49jGfyNDVVa5JF

SL7kPYB3fI9/DMNYUwu3bKomuKge7JzEEmD8wW+YJ37u58ICZsCyLHaFd+i09IorWJ2mGWB9

3q5H7JsiCbMoF8Q7sMDobGuqpvOORiujwWSW1IDNletg8T8j+mTaXpJ8EKYkR/JPrKKIdpt4

osiHY5FX0+pGtXfy4MuYZlzxF7jIxQ+y8Qb80i28

PAGE 1
Getting started with the Midiblock MIDI IN MIDI OUT Receiving MIDI messages in the Patchblock Connect the Midiblock to the left side of the Patchblock and move the switch to the “MIDI IN” position. Make sure you switch on the Patchblock after you connected the Midiblock, otherwise digital glitches can occur that might trigger a Note-On message which gets stuck. Now you can connect a Midi-Keyboard or the Midi-Interface of your computer to the Midiblock and send MIDI messages into the Patchblock.
PAGE 2
Sending MIDI messages from the Patchblock Connect the Midiblock to the right side of the Patchblock and move the switch to the “MIDI OUT” position. Now you can send MIDI messages from Patchblocks to other equipment.