FCC ID: W6YZP-200 ATTACHMENT E. - User Manual - HCT CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No.
USER GUIDE RF&KEYPAD INTEGRATED LOCKER LOCK (model : ZP-200KR) This manual is for the operation of locker lock by Keypad only. For operation by RF key, please refer to our ZP-200R User Guide. Version 1.0.
Table of Contents 1. Understanding ZP200KR Locker Lock..................................... 3 1.1 What is ZP200KR Locker Locks? ....................................................................... 3 1.2 Operation Card Types and Functions................................................................. 3 1.3 Locker Operation System ................................................................................... 4 2. Type of Lock Operation ...........................................................
1. Understanding ZP200KR Locker Lock 1.1 What is ZP200KR Locker Locks? - ZP200KR locker locks are the locker lock operated by either13,56 Mhz RF keys or Digital keypads. 1.2 Operation Card Types and Functions Key Card : Owner Card Delete Master card registration in the lock : Delete Master card registration in the lock Register New Master card in the lock. Master Card : Each of the following function can be set. ① Alarm Off ② Alarm Off, User card delete & registration, and Locker open.
1.3 Locker Operation System Locker Operation System (LOS) is consisted of PC based locker management program and RF Card reader, and enable the operator to issue User card, check lock status and to produce the statistical report. System requirements : Microsoft Windows XP Serial port (or Serial to USB cable) for RF card reader Interface Version 1.0.
2. Type of Lock Operation 2254/2255 locker locks are designed to work for the various operation requirements by simple set up process. Following operation modes can be programmed before or after lock installation. 2.1 Free Selection (Day Use) - User can select any empty locker. - LED lamp is blinked to represent locker is in use. - Programmable to use multiple locks with one User card. - Programmable for Time based operation 2.
3. Operation of the Lock 3.1 Fixed Selection Mode 1)Default Pass Code :1234 2)Open: “ZEPHYR” button + “4 digit pass code”+ “ZEPHYR” button 3)Close: Automatic after several seconds 4)Change Pass Code: “ZEPHYR” button + old pass code + “ZEPHYR” button + new pass code + “ZEPHYR” button + new pass code + “ZEPHYR” button Note: Passwords can be changed only when the lock is under unlocked situation.
4. Lock Setting and Emergency open 4.1 Lock Setting 1) Press “Zephyr” button, and put the Key card and the programmed Set up card to the front lock body in turn. Note : If the lock was already set to any operation mode, and you intend to change this operation mode, please erase any User information stored in the memory of the lock by using Clear Card. 2) The GREEN LED indicator will illuminate followed by melody. 3) The lock will stay as it was (i.e, there is no latch movement).
5. Indication Instruction 1) All the pass code is 4 digit(0-9). 2) “ZEPHYR” button: wake up button,the keypad or RFID does not respond before you press “ZEPHYR” button. 3) Open/Close:GREEN LED on for 0.2 second, one beep sound for 0.2 second. 4) Successful programming:Melody. 5) Indicate for mistake:RED LED flashes 3 times, 6) Low voltage:RED LED blinks 5 times, and beep sounds 5 times.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.