February 2009 09-02-27 www.passtech.co.
SYSTEM COMPONENTS Key card Key Management System Card set 09-02-27 Card Issuing System Info Terminal www.passtech.co.
TECHNICAL SPECIFICATIONS ITEM Main CPU 8bit Microprocessor RF Protocol 13.56Mhz ISO 14443 Type A (basic) Security Unique key for RF lockers and cards Power Operation signal History Tracking Operation Mode Time Recording Dimension Housing Operating temperature Safety & Reliability 09-02-27 FEATURES 6V battery operated (AA battery 4 pcs.
09-02-27 www.passtech.co.
BENEFIT OF THE PRODUCTS Easy Programmable to various operation mode Free Selection / Pre-assigned mode Multi Users (upto 9 users for a locker) / Multi Lockers (upto 5 lockers for a user) Matrix / Week-day operation Time based program for shifts – time setting for 3 shifts Easy installation and maintenance Low installation costs for retrofitting existing lockers Program upgrade at site by using embedded communication socket without dismantle the ZP-100.
BENEFIT OF THE PRODUCTS Simple programming the RF locker Lock and management Just touch the keycard and setup card on the ZP-100, then setting is finished. By using MIS program, operator can supervisde the RF locks in a system. - Low battery, Locker occupancy (Pre-Assigned), Tracking the locker usage, statistics generation, User card management. Possible to change the RF locker lock program without dismantling ZP-100 in the event Locker operation mode needs to be changed.
ZP-100 OPERATION Wake-up by touch sensor & 13.56Mhz ISO 14443 Type A RF based operation Off-line 6V battery operated (basic) / On-line AC Power (Optional) I. Free Selection - Intial Status : Bolt is recessed (door open) Put closely the card on the front cover of the ZP-100 ZP-100 read the card validity and key, then write the Locker information to the card. Bolt comes out from the back housing, and Locker is closed. Put closely the card on the front cover of the ZP-100.
ZP-100 OPERATION II. Pre-Assigned Mode - Intial Status : Bolt comes out (door closed) Put closely the card on the front cover of the ZP-100 ZP-100 authenticates the Card (Locker number, key, and validity). Bolt is released after the authentication process. Bolt operation can be set as semi-automatic cycle or full automatic cycle. 09-02-27 www.passtech.co.
OPERATION MODE z Free Selection Mode - User can select any empty locker. - LED lamp is blinked to represent locker is empty. - Programmable to use multiple locks with one User card (max. 5 lockers) - Programmable to Time based operation 09-02-27 www.passtech.co.
OPERATION MODE z Pre-Assigned Mode - Assigned locker number is registered on the card when card is issued. - ZP-100 check the locker number ad validty of the card. - Programmable to use multiple assigned lockers with one card (max. 5 lockers in current program). - Programmabel to use multiple user mode. User 09-02-27 www.passtech.co.
OPERATION MODE zMulti-user Mode - Multi user can share one locker. - Appliable to both Free Selection and PreAssigned Operation mode. - Current program setting : upto 9 users can share a RF locker. z Multi-Locker Mode - One user can use multiple lockers. - Current program setting : upto 5 lockers can be occupied by a User - Applicable to both Free Selection and Pre-Assigned User Operation mode. 09-02-27 www.passtech.co.
OPERATION MODE z Matrix Mode - It is a mixed operation mode of Multiple locker Mode and Multi User Mode. - A ZP-100 can accept upto 9 users. User 09-02-27 User User User www.passtech.co.
FCC INFORMATION
FCC INFORMATION
